Table of Contents
Advertisement
Combination switch
Main-beam headlamps
:
Turn signal, right
;
Headlamp flasher
=
Turn signal, left
?
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction of
arrow ; or ?.
To switch on the main-beam headlamps:
X
turn the light switch to L or Ã.
Press the combination switch beyond the
X
pressure point in the direction of arrow :.
In the à position, the main-beam head-
lamps are only switched on when it is dark and
the engine is running.
The blue K indicator lamp in the instru-
ment cluster lights up when the main-beam
headlamps are switched on.
To switch off the main-beam headlamps:
X
move the combination switch back to its nor-
mal position.
The blue K indicator lamp in the instru-
ment cluster goes out.
Hazard warning lamps
To switch on the hazard warning lamps:
X
press button :.
All turn signals flash. If you now switch on a
turn signal using the combination switch, only
the turn signal lamp on the corresponding
side of the vehicle will flash.
To switch off the hazard warning lamps:
X
press button :.
The hazard warning lamps switch on automati-
cally if:
an airbag is deployed or
R
the vehicle decelerates rapidly from a speed
R
of above 70 km/h and comes to a standstill
The hazard warning lamps switch off automati-
cally if the vehicle reaches a speed of above
10 km/h again after a full brake application.
i
The hazard warning lamps continue to oper-
ate even if the ignition is switched off.
Intelligent Light System
General notes
The Intelligent Light System is a system that
adjusts the headlamps automatically to suit the
prevailing driving and weather conditions. It
offers advanced functions for improved illumi-
nation of the road surface, e.g. depending on the
vehicle speed or weather conditions. The sys-
tem includes the active light function, cornering
light function, motorway mode and extended
range foglamps. The system is only active when
it is dark.
You can activate or deactivate the "Intelligent
Light System" function using the on-board com-
puter (
page 209).
Y
Exterior lighting
Z
115
Advertisement
Table of Contents
