Table of Contents
Advertisement
cally after authorisation. Further information on
using a mobile phone with the multimedia sys-
tem (see the Digital Owner's Manual).
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone (see the
manufacturer's operating instructions).
Only one mobile phone can be connected to the
multimedia system at any one time.
Searching for a mobile phone
Multimedia system:
Select
Tel/
Tel/®QConnect
Connect
X
deviceQSearch for phones
device
Search for phonesQStart
search.
search
The available mobile phones are displayed.
Symbols in the device list
Sym-
Explanation
bol
Ï
New mobile phone found, not yet
authorised.
Ñ
Mobile phone is authorised, but is
not connected.
#
Mobile phone is authorised and
connected.
Connecting the mobile phone
Authorisation using Secure Simple Pairing:
Select the mobile phone.
X
A code is displayed in the multimedia system
and on the mobile phone.
If codes match: select
X
system.
Confirm the code on the mobile phone.
X
Depending on the mobile phone used, con-
firm the connection to the multimedia system
and for the PBAP and MAP Bluetooth
files. The prompt to confirm may take up to
two minutes to be displayed (see the manu-
facturer's operating instructions).
If the codes are different: select
X
multimedia system.
The process is cancelled.
Repeat authorisation.
Start
Yes
Yes
on the multimedia
®
pro-
No No
on the
Operating system
Authorisation by entering a passkey (passcode):
Select the Bluetooth
X
phone.
The input menu for the passkey is displayed.
Choose a one- to sixteen-digit number com-
X
bination as a passkey.
Enter the passkey on the multimedia system.
X
Press ¬ to confirm.
X
Enter and confirm the passkey on the mobile
X
phone. Depending on the mobile phone used,
confirm the connection to the multimedia sys-
tem and for the PBAP and MAP Bluetooth
profiles. The prompt to confirm may take up
to two minutes to be displayed (see the man-
ufacturer's operating instructions).
i
Mobile phones that are connected to the
optionally available telephone module with
®
Bluetooth
(SAP profile) are displayed sepa-
rately in the device list. These are found below
the entry
MB SAP module
MB SAP module phones
Switching between mobile phones
If you have authorised more than one mobile
phone, you can switch between the individual
phones.
Multimedia system:
Select
Connect
Connect device
device.
X
Select a mobile phone from the device list.
X
Telephone module with Bluetooth
(SAP profile)
Introduction
The module can be used as a permanently instal-
led telephone with its own SIM card
(
page 258) or in conjunction with a mobile
Y
phone (
page 259).
Y
If you wish to use the module in conjunction with
your mobile telephone, the mobile phone must
®
support the Bluetooth
Profile).
The following functions are available using the
module:
hands-free mode
R
data modem mode (
R
sending and receiving text messages
R
(
page 260)
Y
®
name of the mobile
®
phones.
®
SAP profile (SIM Access
page 259)
Y
Z
257
Advertisement
Table of Contents
