Table of Contents
Advertisement
The jacking points are located just behind the
front wheel arches and just in front of the rear
wheel arches (arrows).
Mercedes-AMG vehicles and vehicles with
AMG equipment: to protect the vehicle body,
the vehicle has covers fitted next to the jacking
points on the outer sills.
Mercedes-AMG vehicles and vehicles
X
with AMG equipment: fold cover ?
upwards.
Position jack B at jacking point A.
X
Changing a wheel
Make sure that the base of the jack is posi-
X
tioned vertically under the jacking point.
Turn crank C clockwise until jack B sits
X
completely on jacking point A. The base of
the jack must lie evenly on the ground.
Turn crank C until the tyre is raised a maxi-
X
mum of 3 cm off the ground.
Removing a wheel
!
Mercedes AMG vehicles: when removing
and fitting a wheel, the wheel rim may strike
the ceramic brake disc and damage it. There-
fore, take precautions and have a second per-
son assist you. Alternatively, you can use a
second centring pin.
!
Do not place wheel bolts in sand or dirt. The
threads of the wheel bolts and wheel hubs
could otherwise be damaged when the bolts
are tightened.
Unscrew the uppermost wheel bolt com-
X
pletely.
Screw centring pin : into the thread instead
X
of the wheel bolt.
Unscrew the remaining wheel bolts fully.
X
Remove the wheel.
X
315
Z
Advertisement
Table of Contents
