Table of Contents
Advertisement
Features
266
Problems with the loading aid
Problem
It is no longer possible to
lower the stowed roof in
the boot using the load-
ing aid.
Stowage well under the boot floor
To open: open boot separator ;
X
(
page 95).
Y
Swing boot floor = upwards using loop :.
X
The TIREFIT kit, tyre-change tool kit, etc. is loca-
ted in the stowage compartment.
Features
Cup holders
Important safety notes
G
WARNING
If you do not correctly store objects in the
vehicle interior, they can slip or be flung
around, thus striking vehicle occupants.
There is a risk of injury, especially when brak-
ing or abruptly changing directions.
Always store objects so that they cannot be
R
flung around in these or in similar situa-
tions.
Always make sure that objects do not pro-
R
trude from stowage compartments, lug-
gage nets or stowage nets.
Possible causes/consequences and M M Solutions
You cannot close the boot any more.
Call a qualified specialist workshop.
X
Close lockable stowage compartments
R
while driving.
Stow and secure objects that are heavy,
R
hard, pointy, sharp-edged, fragile or too
large in the boot.
!
Only use the cup holders for containers of
the right size and which have lids. The drinks
could otherwise spill.
!
Do not expose drinks bottles in the cup
holder in the centre console to continuous,
strong and direct sunlight. The passenger
compartment in the area of the centre con-
sole can otherwise be damaged by the con-
centrated and reflected sunlight.
Cup holder in the centre console
To open: open stowage compartment =
X
(
page 263).
Y
To remove the insert: slide catches :
X
inwards in the direction of the arrow.
Remove the cup holder insert upwards.
X
To refit the insert: place the insert in stow-
X
age compartment =.
Slide catches : outwards in the direction of
X
the arrow until they engage.
Advertisement
Table of Contents
