Table of Contents
Advertisement
Instrument cluster
Selecting the distance unit
The
Display unit Speed-/odometer:
Display unit Speed-/odometer:
tion allows you to choose whether certain dis-
plays appear in kilometres or miles in the mul-
tifunction display.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Instrument cluster
Instrument cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Display unit Speed-/odometer
Display unit Speed-/odometer
The current setting
Press the a button to save the setting.
X
The selected unit of measurement for distance
applies to the:
digital speedometer in the
R
total distance recorder and trip meter
R
trip computer
R
current consumption and the range
R
navigation instructions in the
R
cruise control
R
speed limiter
R
Distance Pilot DISTRONIC
R
ASSYST PLUS service interval display
R
Selecting permanent display
United Kingdom: this function is unavailable.
The
Permanent display:
Permanent display:
to choose whether the multifunction display
always shows the outside temperature or the
speed.
The speed display is inverse to your speedome-
ter.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Instrument cluster
Instrument cluster
Press a to confirm.
X
Press the : or 9 button to select the
X
Permanent display:
Permanent display:
The current setting,
or
Dig. speedo
Dig. speedo [mph]:
[mph]:, appears.
To change the setting: press a again.
X
func-
Settings
Settings
menu.
submenu.
function.
km km
or
miles
miles
appears.
Trip
Trip
menu
Navi
Navi
menu
function allows you
Settings
Settings
menu.
submenu.
function.
outside temperature
outside temperature
Menus and submenus
Lights
Setting the daytime driving lights
The
Daytime driving lights
Daytime driving lights
only be switched on with the engine switched
off.
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Lights
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Daytime driving lights
Daytime driving lights
If the
Daytime
Daytime driving
driving lights
been switched on, the cone of light and the
W symbol in the multifunction display are
shown in orange.
Press the a button to save the setting.
X
Further information on daytime driving lights
(
page 113).
Y
Switching the Intelligent Light System
on/off
Press the = or ; button on the steering
X
wheel to select the
Press the : or 9 button to select the
X
Lights
Lights
submenu.
Press a to confirm.
X
Press the : or 9 button to select the
X
Intell. Light System
Intell. Light System
If the
Intell. Light System
Intell. Light System
been switched on, the multifunction display
shows the cone of light and the L symbol
in orange.
Press the a button to save the setting.
X
When you activate the
you activate the following functions:
Motorway mode
R
Active light function
R
Cornering light function
R
Extended range foglamps
R
If you set the dipped-beam headlamps for driv-
ing on the right/left, the multifunction display
shows the
Intell. Light System: System
Intell. Light System: System
inoperative Inactive for left-side
inoperative Inactive for left-side
traffic
traffic
or
Intell. Light
Intell.
Light System:
inoperative Inactive for right-side
inoperative Inactive for right-side
traffic
traffic
display message instead of the
Intell. Light Sys.
Intell. Light Sys.
submenu (
page 210). This display message
Y
will only appear if the setting for driving on the
function can
Settings
Settings
menu.
function.
lights
function has
Settings
Settings
menu.
function.
function has
Intell.
Intell. Light
Light System
System,
System: System
System
function in the
Light
Light
209
Z
Advertisement
Table of Contents
