Table of Contents
Advertisement
Side windows
92
Touch recessed sensor surface : on the
X
door handle until the side windows are fully
closed.
i
Make sure you only touch recessed sensor
surface :.
To interrupt convenience closing: release
X
recessed sensor surface : on the door han-
dle.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
Close all doors.
X
Turn the key to position 1 or 2 in the ignition
X
lock.
Pull the corresponding switch on the door
X
control panel until the side window is com-
pletely closed (
Hold the switch for an additional second.
X
If the side window opens again slightly:
Immediately pull the corresponding switch on
X
the door control panel until the side window is
completely closed (
Hold the switch for an additional second.
X
If the corresponding side window remains
closed after the button has been released, the
side window has been reset correctly. If this is
not the case, repeat the steps above again.
page 90).
Y
page 90).
Y
Advertisement
Table of Contents
