Table of Contents
Advertisement
Displaying the attention level
You can have current status information dis-
played in the assistance menu (
the on-board computer.
Select the assistance graphic display for
X
ATTENTION ASSIST using the on-board com-
puter (
page 207).
Y
The following information is displayed:
the length of the journey since the last break
R
the attention level determined by ATTENTION
R
ASSIST, displayed in a bar display in five levels
from high to low
if ATTENTION ASSIST is unable to calculate
R
the attention level and cannot output a warn-
ing, the
System suspended
System suspended
appears. The bar display then changes the
display, e.g. if you are driving at a speed below
60 km/h or above 200 km/h.
Activating ATTENTION ASSIST
Activate ATTENTION ASSIST using the on-
X
board computer (
Y
The system determines the attention level of
the driver depending on the setting selected:
Standard selected: the sensitivity with which
the system determines the attention level is set
to normal.
Sensitive selected: the sensitivity is set higher.
The attention level detected by ATTENTION
ASSIST is adapted accordingly and the driver is
warned earlier.
When ATTENTION ASSIST is deactivated, the
À symbol and OFF appear in the multifunc-
tion display in the assistance graphics display
when the engine is running.
When ATTENTION ASSIST has been deactivated,
it is automatically reactivated after the engine
has been switched off. The sensitivity selected
page 207) of
Y
message
page 208).
corresponds to the last selection activated
(standard/sensitive).
Warning in the multifunction display
If fatigue or increasing lapses in concentration
are detected, a warning appears in the multi-
function display:
Attention Assist:
Attention
break!
break!
In addition to the message shown in the multi-
function display, you will then hear a warning
tone.
If necessary, take a break.
X
Confirm the message by pressing the a
X
button on the steering wheel.
On long journeys, take regular breaks in good
time to allow yourself to rest. If you do not take
a break, you will be warned again after
15 minutes at the earliest. This will only happen
if ATTENTION ASSIST still detects typical indi-
cators of fatigue or increasing lapses in concen-
tration.
Vehicles with COMAND Online: if a warning is
output in the multifunction display, a service
station search is performed in COMAND Online.
You can select a service station and navigation
to this service station will then begin. This func-
tion can be activated and deactivated in
COMAND Online.
Traffic Sign Assist
General notes
Traffic Sign Assist displays the maximum speed
permitted and overtaking restrictions to the
driver in the instrument cluster. Driving onto a
section of road in the wrong direction triggers a
warning. Traffic Sign Assist detects traffic signs
with camera system : attached behind the top
Driving systems
Assist: Take
Take a a
191
Z
Advertisement
Table of Contents
