Mercedes-Benz SL 2015 Owner's Manual page 143

Table of Contents

Advertisement

DYNAMIC SELECT controller (Mercedes-AMG vehicles)
140
E Economy
(vehicles with
adjustable
damping)
CV CURVE
(vehicles with
Active Body
Control)
Additional information for drive programs
(
page 145).
Y
DYNAMIC SELECT controller
(Mercedes-AMG vehicles)
General notes
Select the drive program using the DYNAMIC
SELECT controller.
Available drive programs:
I Individual
C Comfort
S Sport
S+ Sport Plus
RACE
Depending on the drive program selected, the
following vehicle characteristics will change:
the drive (engine management)
R
the transmission management
R
®
ESP
R
the suspension
R
the steering
R
the availability of the ECO start/stop function
R
the driver assistance systems
R
the availability of gliding mode
R
Further information for automatic drive program
characteristics (
Particularly economical
driving characteristics
Particularly economical
driving characteristics with
cornering function
Individual settings
Comfort-orientated, engine
and transmission settings
optimised for economy
Sporty engine and trans-
mission settings
Particularly sporty trans-
mission settings
Maximum sportiness and
engine and transmission
settings suitable for the
racetrack
page 145).
Y
Additionally, in drive program I you can config-
ure the respective vehicle characteristics using
the multimedia system. You can find informa-
tion on this in the Digital Owner's Manual.
If the ignition is switched off for less than four
hours, the previously selected drive program is
activated when the engine is next started. If the
ignition is switched off for more than four hours,
drive program C is activated when the engine is
next started.
Selecting the drive program
Turn DYNAMIC SELECT controller : as many
X
times as necessary until the desired drive
program is selected.
The status icon of the selected drive program
is shown in the multifunction display.
In addition, the current drive program settings
are displayed briefly in the display of the mul-
timedia system.
The drive program indicator on DYNAMIC
SELECT controller : lights up in red.
Additional information for drive programs
(
page 145).
Y

Advertisement

Table of Contents
loading

Table of Contents