Mercedes-Benz SL 2015 Owner's Manual page 93

Table of Contents

Advertisement

Side windows
90
G
WARNING
While closing the side windows, body parts in
the closing area could become trapped. There
is a risk of injury.
When closing make sure that no parts of the
body are in the closing area. If somebody
becomes trapped, release the switch or press
the switch to open the side window again.
G
WARNING
Children could become trapped if they oper-
ate the side windows, particularly when unat-
tended. There is a risk of injury.
When leaving the vehicle, always take the key
with you and lock the vehicle. Never leave
children unattended in the vehicle.
Side window reversing feature
The front side windows are equipped with an
automatic reversing feature. If a solid object
blocks or restricts the upward movement of one
of the front side windows during the closing
process, the side window opens again automat-
ically. During the manual closing process, the
side window only opens again automatically
after the corresponding switch is released. How-
ever, the automatic reversing feature is only an
aid, not a substitute for your attention when
closing the side window.
G
WARNING
The reversing function does not react:
to soft, light and thin objects, e.g. small fin-
R
gers
over the last 4 mm of the closing movement
R
during resetting
R
when closing the side window again man-
R
ually immediately after automatic reversing
This means that the reversing function cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
When closing make sure that no parts of the
body are in the closing area. If someone
becomes trapped, press the switch to open
the side window again.
Opening and closing the side win-
dows
Opening and closing the side windows
in the front
The switches for the side windows are located
on the driver's door. There is also a switch for
the front-passenger side window on the front-
passenger door.
The switches on the driver's door take prece-
dence.
Left
:
Right
;
Turn the key to position 1 or 2 in the ignition
X
lock.
To open manually: press and hold the cor-
X
responding button.
To open fully: press the button beyond the
X
point of resistance and release it.
Automatic operation is started.
To close manually: pull the corresponding
X
button and hold it.
To close fully: pull the button beyond the
X
point of resistance and release it.
Automatic operation is started.
To interrupt automatic operation: press or
X
pull the corresponding switch again.
You can continue to operate the side windows
after you switch off the engine. This function
remains active for five minutes or until the driv-
er's or front-passenger door is opened.

Advertisement

Table of Contents
loading

Table of Contents