Warnings - Electrolux EID200QSW00 Technical & Service Manual

3. Warnings

• Any work on Electrical Appliances must be carried out by qualified professional only.
• Confirm that the Power System is operational before working on the Appliance.
• Check that the Appliance is restored to its original safety condition after the operation is complete. Take the
plug out of the socket to disconnect the power supply before you access internal components. This platform
is not fitted with an ON / OFF switch.
• Replace the Heating Element with one that has the same characteristics to
maintain safety measures for the Appliance (See Fig. 1).
• Always empty the Appliance before laying it on its side for any servicing.
• Always wear gloves before servicing any components.
• The resistance values of the components shown in this Service Manual are
purely indicative and approximate.
• Warning Sensors located on the display board could be at a potential of 220
Volts (If applicable).
• Do not place any container under the Appliance to avoid collecting drops of
water.
8
Fig. 1: Heating Element
with Different Specification