Fig; Unit (See Fig. 37) - Electrolux EID200QSW00 Technical & Service Manual

8. Release the 2 snaps in the marked direction (See
Fig. 43 and Fig . 44).

Fig. 43

9. Unplug all the connectors and release the snaps
to take out the Main Control Board Assembly from the
unit (See Fig. 45).
Fig. 46: Electronic Board Assembly
Steps to assemble the Main Control Board:
1. Plug all the connectors and fix the snaps to insert
the Main Control Board Assembly (See Fig. 45).
2. Place the Main Control Board in its position and
push the 2 snaps in the shown direction (See Fig. 47
and Fig. 48).
Serviceable Component Accessibility
Fig. 44
Fig. 45
Fig. 47
3. Place the the Main Control Board support gently
in its position that hold the Main Control Board
Assembly (See Fig. 56).
4. Tighten the 3 screws that hold Main Control Board
in its place (See Fig. 41).
5. Slide down the Right Panel and align it in its screw
position (See Fig. 50).
6. Place the Reinforcement Bracket in its screw
position (See Fig. 51).
Fig. 50
7. Tighten the 2 screws from the left of the Top Panel
that hold Reinforcement Bracket (See Fig. 36).
8. Tighten the 4 screws of the Rear Panel that hold
the Right Side Panel in its place (See Fig. 35).
9. Reassemble the Top Panel (Refer last 4 steps of
Control Panel Assemble Procedure).
23
Fig. 48
Fig. 49
Fig. 51