Table of Contents
Advertisement
Setup, Configuration and Calibration
6.2.14 Instrument ID – Instrument Unique Number Identification
This menu provides the instrument with a unique ID up to 4 digits. This ID can be used when
logged data is downloaded. This enables the data to be associated with a particular instrument or
location.
To set the instrument ID:
1.
Enter the CONFIG mode by pressing the
illuminated, then press the
2. Press the
button to move to the next menu until ID is displayed.
3. Use the
and
and repeat the process for all numbers. Scroll through the numbers to the next menu.
6.2.15 Logging Interval – Setting the interval for logged files
This menu determines how often readings are logged. The setting is in minutes. This can be set
from 1 minute to 60 minutes.
To set the logging interval:
1. Enter the CONFIG mode by pressing the
illuminated, then press the
2. Press the
button to move to the next menu until INVL is displayed.
3. The value can be adjusted by using the
4. Once the value is set, press the
exit and return to AUTO.
100193 Rev 0 ba77254e01 11/2020
button.
buttons to select the value of the first number. Use the
button.
button to accept it and move to the next menu or the
and
buttons until the arrow beside CONFIG is
and
buttons until the arrow beside CONFIG is
and
buttons.
Turb PLUS 2000
to select the next number
button to
37
Advertisement
Table of Contents
