Table of Contents
Advertisement
SMA Solar Technology AG
• Insulated conductors with solid wire and small cross-section
• Insulated conductors with stranded wire without bootlace ferrule
Accordingly, there are different procedures.
Procedure
Connecting the insulated conductors with
solid wire and large cross-section
Connecting the insulated conductors with
stranded wire and bootlace ferrule
Connecting the insulated conductors with
solid wire and small cross-section
Connecting the insulated conductors with
stranded wire without bootlace ferrule
Installation Manual
Actions
1. Insert the insulated conductor into the terminal until it reaches the
stop. When doing so, ensure that no insulation is trapped in the
terminal.
2. To remove the insulated conductor from the terminal, unlock the
clamping contact using proper tools. Then pull out the terminal.
1. Pretension the spring of the terminal with a suitable flat-head
screwdriver.
2. Insert the insulated conductor into the terminal until it reaches the
stop. When doing so, ensure that no insulation is trapped in the
terminal.
3. To remove the insulated conductor from the terminal, unlock the
clamping contact using proper tools. Then pull out the terminal.
6 Electrical Connection
PPM-10-IA-en-16
57
Advertisement
Table of Contents
