Specific Installation Procedures; Setting The Temperature; Specific Maintenance Conditions; Parts Which Can Be Replaced - Atlantic CHAUFFEO Installation And Operating Manual

EN
Your water heater: Wiring diagrams
III. Specific installation procedures
Adjusting the temperature
The factory temperature setting is 65° C.
The temperature may be lowered
by turning the wheel.
IV. Specific maintenance conditions
Parts that can be replaced
• Thermostat
• Cover
• Heater body (only for Steatite water heaters)
The seal must be replaced if the heater body is replaced or opened.
Any replacement operation must be performed by a qualified person using
the manufacturer's original parts.
52
+ + - -
- -
• Heater element
• Seal
Potentiometer
- - + +
+ +