Atlantic CHAUFFEO Installation And Operating Manual page 42

EN
Installation Manual: Fitting the water heater
Specific case :
Fitting a vertical wall-mounted water heater on a tripod
The use of a compliant and compatible tripod is mandatory
when fitting a water tank with a capacity greater than 100 L
on a non load-bearing wall (cannot support the weight of the
full tank).
First fit the water heater on its tripod in order to mark
the mounting points.
Carry out the drilling.
Put the water heater back in place.
Mount the upper bracket.
Fitting a vertical wall-mounted water heater Blinded 50L Slim
Fasten the wall plate to the wall
using M8 studs (pre-fixed on the wall)
and M8 nuts
40