Can-Am MAVERICK Sport MAX T Operator's Manual page 31

ITEMS TO BE
INSPECTED
Accelerator pedal
Brake pedal
Fuel level
What to Do After the Engine is Started
ITEMS TO BE
INSPECTED
Steering
RF D.E.S.S. post
Shift lever
2WD/4WD selector
Brakes
________
INSPECTION TO PERFORM
Press on the accelerator pedal a few times to ensure it
operates freely and it returns to the rest position when
released.
Press down on the brake pedal and make sure you feel
firm resistance and that it fully returns to position when
released.
Check the fuel level.
INSPECTION TO PERFORM
Check if steering wheel operates freely by completely
turning it from side to side.
Check if D.E.S.S. post is working properly by pulling the
D.E.S.S. key from D.E.S.S. post.
Check operation of shift lever (P, R, N, H and L).
Check operation of 2WD/4WD selector.
Drive forward slowly a short distance and apply brakes.
The brake pedal must feel firm when applied. The pedal
must return to rest position when released. The brakes
must respond adequately to the driver's input.
SAFETY INFORMATION
PRE-RIDE INSPECTION
________
✔
✔
29