Can-Am MAVERICK Sport MAX T Operator's Manual page 128

MAINTENANCE PROCEDURES
Taillight Bulbs Replacement
The taillights are built with LEDs (light
emitting diode) and this technology
proved to be reliable. In the unlikely
event they do not work, have them
checked or replaced by an authorized
Can-Am dealer, a repair shop or person
of your choosing.
Front Turn Signal Light Bulb
Replacement
1. Remove the light bulb socket from
underside the fender.
219002007-021_a
TURN SIGNAL LIGHT SOCKET
1. Retaining screws
2. Replace the light bulb.
3. Reinstall the socket.
Rear Turn Signal Light Bulb
Replacement
1. Remove the turn signal lens re-
taining screw from underside the
fender.
219002007-020_a
1. Lens retaining screw
______________
126
2. Remove the light bulb socket.
3. Replace the light bulb.
4. Reinstall the bulb socket and other
removed parts in the reverse order.
Front Position Light Replacement
NOTE: The front position lights cannot
be disassembled. They have to be re-
placed as a whole.
1. Disconnect the electrical connector.
2. Unscrew the retaining nut.
3. Remove the position light.
219002007-022_a
1. Position light electrical connector
2. Retaining nut
4. Install the new position light in the
reverse order.
Licence Plate Bulb Replacement
1. Remove the licence plate bulb
cover.
219002007-023_a
1. Licence plate bulb cover
2. Retaining screw
2. Replace the bulb.