Can-Am MAVERICK Sport MAX T Operator's Manual page 115

WARNING
In order to avoid potential burns,
do not remove the pressure cap if
the engine is hot.
3. Ensure cooling system is full up to
the Max line.
tmo2016-010-004_a
PARTS REMOVED FOR CLARITY
Adding Coolant
1. Remove the coolant tank pressure
cap.
219001880-034_b
TYPICAL
2. Add coolant in system as neces-
sary. Use a funnel to avoid spillage.
Do not overfill.
3. Properly reinstall pressure cap on
cooling tank.
4. Reinstall cooling tank access cover.
NOTE: A cooling system that fre-
quently requires addition of coolant
is an indication of leaks or engine prob-
lems.
Recommended Engine Coolant
COUNTRY
Scandinavia
All other countries
Alternative, or if
not available
NOTICE
col antifreeze containing corrosion
inhibitors specifically for internal
combustion aluminum engines.
Engine Coolant Replacement
Cooling System Draining
In order to avoid potential burns,
do not remove the pressure cap or
loosen the coolant drain plug if the
engine is hot.
1. Remove coolant tank access cover.
219001880-033_a
TYPICAL
1. Coolant tank access cover
______________
MAINTENANCE PROCEDURES
RECOMMENDED
COOLANT
EXTENDED LIFE
PRE-MIXED
COOLANT (EUR)
(P/N 779223)
EXTENDED LIFE
PRE-MIXED
COOLANT
(P/N 779150)
Distilled water
and antifreeze
solution (50%
distilled water,
50% antifreeze)
Always use ethylene-gly-
WARNING
113