Drive Shaft Boot And Protector; Wheel Bearing - Can-Am MAVERICK Sport MAX T Operator's Manual

3. Reinstall the cover.
Drive Shaft Boot and
Protector

Drive Shaft Boot and Protector

Inspection
Visually inspect drive shaft protectors
and boots condition.
Check protectors for damage or rub-
bing against shafts.
Check boots for cracks, tears, leaking
grease, etc.
Repair or replace damaged parts as
necessary.
219001880-049_a
TYPICAL - FRONT OF VEHICLE
1. Inner drive shaft boots
219001880-050_a
TYPICAL - FRONT OF VEHICLE
1. Outer drive shaft boot
219001880-051_a
TYPICAL - REAR OF VEHICLE
1. Inner drive shaft boots
219001880-052_a
TYPICAL - REAR OF VEHICLE
1. Outer drive shaft boot

Wheel Bearing

Wheel Bearing Inspection
Lift and support vehicle. Refer to
ING AND SUPPORTING THE VEHI-
CLE
.
Push and pull the wheels from the up-
per edge to feel the play.
See an authorized Can-Am dealer, a re-
pair shop or person of your choosing if
there is an excessive play.
______________
MAINTENANCE PROCEDURES
LIFT-
127