Cvt Cover Installation; Drive Belt - Can-Am MAVERICK Sport MAX T Operator's Manual

219002004-029_a
1. CVT air intake hose
2. Gear clamp
Remove all CVT cover retaining
screws.
Remove the center top screw last to
support the cover during removal.
NOTICE
Do not use an impact tool
to remove CVT cover screws.
Remove the CVT cover and its gasket.
219002004-030_a
TYPICAL
1. CVT cover
2. CVT cover gasket
3. CVT cover screws

CVT Cover Installation

Install the center top screw of first.
Tighten the CVT cover screws as per
following sequence.
219002004-031_a
CVT cover
screws
Install CVT air intake hose.
219002004-029_a
1. CVT air intake hose
2. Gear clamp
Gear clamp

Drive Belt

Drive Belt Removal
NOTICE
ure, the CVT, cover and air outlet
must be cleaned.
Please refer to
ING DRIVE BELT DURABILITY
SIC PROCEDURES
IMPORTANT information.
Remove
Open driven pulley.
______________
MAINTENANCE PROCEDURES
TIGHTENING TORQUE
7 N•m ± 0.8 N•m
(62 lbf•in ± 7 lbf•in)
TIGHTENING TORQUE
2 N•m ± 0.3 N•m
(18 lbf•in ± 3 lbf•in)
In case of a drive belt fail-
TIPS FOR MAXIMIZ-
section for some
CVT COVER
.
BA-
in
121