Can-Am MAVERICK Sport MAX T Operator's Manual page 74

Table of Contents

Advertisement

7.6" DIGITAL DISPLAY
Unit Selection
This multifunction gauge is factory pre-
set in Imperial units but it is possible to
change it to Metric units.
Using MENU button, select UNITS
and hold button to change units.
Speed/RPM
The speed and RPM display can be
swapped.
Using
MENU
SPEED/RPM and hold button to
invert speed and RPM display.
NOTE: Only available when speed lim-
iter is disabled.
Setting Clock
Using MENU button, Select CLOCK
and hold to change time.
1. Press MENU button to select clock
display.
2. Push and hold MENU button.
3. Press MENU button to select 12:00
AM PM or 24:00 time base.
4. Push and hold MENU button or OK
button to acknowledge selection.
5. Press MENU button to change
hours (hours flash).
6. Push and hold MENU button or OK
button to acknowledge hour selec-
tion
7. Press MENU button to change min-
utes.
8. Push and hold MENU button or OK
button to acknowledge minute se-
lection.
Setting Brightness
The brightness of the LCD display can
be adjusted.
Using MENU button, select BRIGHT-
NESS and hold MENU button to select
the brightness setting.
______________
72
button,
select
Using MENU button, adjust brightness
then push and hold MENU button to ac-
knowledge selection.
Setting Language
The gauge display language can be
changed.
Refer to an authorized
Can-Am dealer for language availability
and to setup the gauge to your prefer-
ence.
Speed Limiter Mode
Speed limiter mode allows the opera-
tor to set the desired maximum speed.
This is useful when operating in limited
speed zones.
The operator must keep the throttle de-
pressed to maintain forward speed.
Once the maximum speed is set, the
operator can vary the vehicle speed
from stopped to the set speed using
the throttle. The set speed will be ex-
ceeded when the throttle is fully de-
pressed, at that time, the speed limiter
will be temporary deactivated (the icon
will be blinking) until vehicle speed is
under or equal the speed limiter's set
point.
As you proceed under a constant
speed setting, keep your attention
level up to maintain good situational
awareness.
Slowing down is a matter of releasing
the throttle.
Activating Speed Limiter Mode
1. Press the MENU button on the key-
pad to go to the
SPEED LIM
2. Select
have a choice of
2.1 in km/h:
– -- (Unlimited)
– 30 km/h
– 40 km/h
– 50 km/h
– 60 km/h
– 70 km/h
SETTINGS
menu.
, then you will

Advertisement

Table of Contents
loading

Table of Contents