Mounting The Controller; Din Track Mounting - Omron F160 Setup Manual

Mounting the Controller

14. Lit when power is being supplied to the Memory Card. (The Memory Card
15. Connects the F160 to a Console.
2-3

Mounting the Controller

There are four ways to mount the Vision Mate Controller: DIN Track mounting,
rear surface-mounting, side surface-mounting, or bottom surface-mounting.
2-3-1

DIN Track Mounting

The Vision Mate Controller can be easily mounted to or removed from 35-mm
DIN Track.
PFP-M End Plate
(OMRON)
The following DIN Tracks are available from OMRON.
PFP-100N
PFP-50N
PFP-100N2
Mounting the Controller
Hook the Controller into the DIN Track as shown in the diagram and then
press in at the bottom until the Controller locks into place.
All manuals and user guides at all-guides.com
must not be inserted or removed when this indicator is lit.)
Model Length
1 m
50 cm
1 m
Section 2-3
DIN Track
11