250/409
Connection technique
8.3
Power connection of stators with housing
8.3.1
General information
8.3.2
Stators with housing and device connector
Device connector RLS1200
Bosch Rexroth AG R911298798_Edition 08
Depending on the stator design, the power connection of the stators with a
housing for flange mounting is realized via
●
a terminal box or
●
a device connector.
From this junction, the power supply can be realized using a power cable to
the controller. Prepared power cables are available from Rexroth.
Please note the data in the type code and the dimension sheet of the particu‐
lar stator design.
Frame size
MST210A-0027-FH-xxPU-...
MST210C-0027-FH-xxPU-...
MST210C-0050-FH-xxPU-...
MST210D-0070-FH-xxPU-...
MST210E-0027-FH-xxPU-...
MST290B-0018-FH-xxPU-...
MST290D-0002-FH-xxPU-...
MST290D-0004-FH-xxPU-...
MST290D-0018-FH-xxPU-...
MST290E-0004-FH-xxPU-...
MST290E-0018-FH-xxPU-...
Tab. 8-7:
Overview of stators with housing and device connector
Fig. 8-7:
Device connector RLS1200
MBT High Synchronous Torque Motors
Minimum cross section
Device connec‐
tor
RLS1200
71
V1
6
U
1
5
Continuative power
cable [mm²]
see
Tab. 8-3
9
7
W
1
8