Coolant Additives; Materials Used - Bosch rexroth MBT Manual

266/409
Application notes
9.7.3

Coolant additives

Coolant additives
9.7.4

Materials used

Bosch Rexroth AG R911298798_Edition 08
The following table shows several manufacturers of cooling additives. Prod‐
ucts of other manufacturers can be also be used.
Nalco Deutschland GmbH
FUCHS PETROLUB AG
Clariant Produkte (Germany) GmbH
hebro chemie GmbH
TYFOROP Chemie GmbH
Schweizer-Chemie GmbH
Tab. 9-4: Manufacturer of chemical additives
Bosch Rexroth does not make any general statement and does
not conduct any surveys regarding the suitability of device-specif‐
ic cooling media, additives or operating conditions and does not
assume any warranty for third-party products.
The performance test for the used cooling media and the design
of the liquid cooling system is the responsibility of the machine
manufacturer. The selected coolant additives have to comply with
the materials within the cooling system.
Comply with the environmental protection and waste disposal in‐
structions at the place of installation when selecting the coolant
additives.
The proper chemical treatment of the closed water systems is precondition to
prevent corrosion, to maintain thermal transmission, and to minimize the
growth of bacteria in all parts of the system.
Coolant additives of NALCO Deutschland GmbH (example):
Coolant water Nalco CCL100 is a ready-to-use, preserved cooling water for
use in closed cooling water systems. Nalco CCL100 contains corrosion inhib‐
itor protecting ferrous metal, copper, copper alloys and aluminum. The water
is free from nitrite and minimizes the micro-biological growth.
Coolant additive NALCO TRAC100 is a liquid corrosion and film inhibitor for
the use in closed cooling systems. Nalco TRAC100 is a complete inhibitor
protecting ferrous metal, copper alloys and aluminum against corrosion. It is
free from nitrite and minimizes the micro-biological growth.
Coolant additive NALCO 7330 is a non-oxidizing broad band biocide and suit‐
able for application in closed cooling circuit systems.
Coolant additive Nalco 73199 is an organic corrosion inhibitor supporting a
fast own protection layer and covering protection layer for non-ferrous metals.
At MBT motors, the coolant comes into contact with the following materials:
Frame size MST
130 ... 531
360 ... 530
Tab. 9-5: Materials coming into contact with the coolant
For dimensioning and operation of the cooling system, the machine manufac‐
turer has to ensure that the components of the motor do not get into contact
MBT High Synchronous Torque Motors
http://www.nalco.com
http://www.fuchs-oil.com
http://www.antifrogen.de
http://www.hebro-chemie.de
http://www.tyfo.de
http://www.schweitzer-chemie.de
Cooling jacket Housing
-
AlSi5Mg
AlSi5Mg
O-ring
Viton