Table of Contents
Advertisement
MBT High Synchronous Torque Motors
8
Connection technique
8.1
Notes
NOTICE
The motors described here can only be operated with suitable drive control‐
lers with variable output voltage and frequency (converter mode) as specified
by Rexroth.
Rexroth offers a wide range of cables with connectors for connecting MBT
motors. These cables are optimally adapted to the products and to different
requirements.
●
Note that self assembled cables or cable systems of other
manufactures possibly do not meet these requirements.
Rexroth shall not be held responsible for resulting malfunc‐
tion states or damage.
Additional information...
●
For selection of power and encoder cables for MBT motors
in the "Rexroth Connection Cables IndraDrive and IndraDyn"
(DOK-CONNEC-CABLE*INDRV-AU□□-□□-P).
●
about the assembly of cables and plugs as well as technical
data, in documentation "Rexroth Connection Techniques,
Assembling and Tools..." (DOK-CONNEC-CAB*INSTR02-
MA□□-□□-P).
●
on "Electromagnetic Compatibility in Drive and Control Sys‐
tems" (DOK-GENERL-EMC********-PR□□-□□-P).
Connection technique
Motor destruction by direct connection to the
50/60 Hz mains power supply (three phase or
single phase net)!
R911298798_Edition 08 Bosch Rexroth AG
237/409
Advertisement
Table of Contents
