Table of Contents
Advertisement
MBT Synchronous Torque Motors
5
Transport and storage
5.1
Notes about transport (shipping) instructions
Transport by air freight
Our products must be transported in their original package only. Also refer to
the specific ambient factors to protect the products from transport damage.
Based on DIN EN 60721-3-2, the tables below specify classifications and lim‐
it values which are allowed for our products while they are transported by
land, sea or air. Refer to the detailed description of the classifications to take
all of the factors which are specified in the particular class into account.
Allowed classes of environmental conditions during transport acc. to DIN EN
60721-3-2
Classification type
Classification of climatic environmental conditions
Classification of biological environmental conditions
Classification of chemically active materials
Classification of mechanically active materials
Classification of mechanical environmental conditions
Tab. 5-1:
Allowed classes of environmental conditions during transport
For a better overview, some essential environmental influencing variables of
the previously mentioned classifications are listed. Unless otherwise speci‐
fied, the specified values are the values of the particular class. However,
Bosch Rexroth reserves the right to adjust these values at any time based on
future experiences or changed environmental factors.
Deviating from DIN EN 60721-3-2 permissible ambient conditions
Environmental factor
Temperature
Relative air humidity
Absolute air humidity
Occurrence of salt mist
1)
Differs from DIN EN 60721-3-2
Tab. 5-2:
Deviating permissible storage conditions
Before transport, discharge the liquid coolant from liquid-cooled
stators with housing (encapsulation "H") to avoid frost damage.
CAUTION
If rotors are not forwarded in the unopened Rexroth original packaging, appli‐
cable packaging and transport regulations must be observed (IATA 953).
Transport and storage
Unit
Value
1)
°C
-25 ... +70
%
5 ... 75
g/m³
1 ... 29
-
Not permitted
Possible influence of plane electronic on
board through magnet fields!
R911336703_Edition 03 Bosch Rexroth AG
17/67
Allowed class
2K11
2B1
2C1
2S5
2M4
Advertisement
Table of Contents
