Table of Contents
Advertisement
MBT Synchronous Torque Motors
10
Environmental protection and disposal
Production method
No release of hazardous substan‐
Basic components
Return of products
Permanent magnets
Packaging
Batteries and accumulators
The products are manufactured in energy- and resource-optimized produc‐
tion processes which allow re-using and recycling the resulting waste. We
regularly try to replace pollutant-loaded raw materials and supplies by more
environment-friendly alternatives.
Our products do not contain any hazardous substances which may be re‐
ces
leased in case of appropriate use. Normally, our products will not have any
negative influences on the environment.
Basically, our motors consist of the following components: Steel, aluminum,
copper, brass, permanent magnets (rare earth metal), electrotechnical com‐
ponents.
Our products can be returned to us for disposal free of charge. However, this
requires that the products be free from oil, grease or other dirt.
Furthermore, the products returned for disposal may not contain any undue
foreign material or foreign components.
Deliver the products "free domicile" to the following address:
Bosch Rexroth AG
Electric Drives and Controls
Buergermeister-Dr.-Nebel-Straße 2
97816 Lohr am Main, Germany
WARNING
Health hazard for persons with heart pacemakers, metallic
implants and hearing aids in direct environment of permanent
magnets.
Crushing hazard of fingers and hand due to heavy attrac‐
tive forces of the magnets.
Risk of destruction of sensitive parts such as watches,
credit cards, ...
Permanent magnets present a serious danger during disposal. Prior to dis‐
posal, permanent magnets attached to the motor components (e.g. synchro‐
nous motor rotors, secondary parts of linear motors) have to be demagne‐
tized using thermal treatment. The disposal of demagnetized permanent
magnets is prohibited.
Demagnetize magnets
The demagnetization of the permanent magnets is reached via special ther‐
mal treatment. The handling duration is influenced by the frame of the motor
component. The motor component has to remain in the oven for a minimum
of 30 minutes, starting at the time, the magnetic surface has reached 300 °C.
Please also refer to the safety instructions regarding protection from magnet‐
ic fields, handling and assembly in the chapter "Safety Notes for Electric
Drives and Controls" when using permanent magnets.
Packaging materials consist of cardboard, wood and polystyrene. They can
be recycled anywhere without any problem.
For ecological reasons, please refrain from returning the empty packages to
us.
Batteries and accumulators can be labeled with this symbol.
Environmental protection and disposal
Danger due to permanent magnets!
R911336703_Edition 03 Bosch Rexroth AG
57/67
Advertisement
Table of Contents
