Mounting Stators With Cooling Jacket And Housing - Bosch rexroth MBT Operating Instructions Manual

26/67
Assembly
6.2.2

Mounting stators with cooling jacket and housing

Bosch Rexroth AG R911336703_Edition 03
Stator
Dimension
MST290B
MST290D
MST290E M5 / 11 mm deep
MST290F
MST290G
MST291C
MST291D
M5 / 11 mm deep
MST291E
MST360B
MST360D
M6 / 14 mm deep
MST360E
MST450B
MST450D
M8 / 18 mm deep
MST450E
MST530B
MST530C
M8 / 20 mm deep
MST530D
MST530E
MST530F
MST530G
MST530L
M10 / 23 mm deep
MST530P
MST530R
MST531E M8 / 20 mm deep
MST531L M10 / 23 mm deep
Tab. 6-1: Fastening thread at the stator
For exact position of the threaded holes, refer to the dimension
sheet of the stator in MBT project planning manual (see
"Additional documentation" on page
The machine manufacturer must observe the special features of
the construction and create a special assembly instruction for the
motor components rotor and stator. The machine manufacturer's
mounting instructions are the only binding guidelines.
MBT Synchronous Torque Motors
Fastening thread at the stator
(Amount)
12 (on both sides)
20 (on both sides)
30 (towards cable output)
28 (cable output side)
12 (on both sides)
20 (on both sides)
12 (on both sides)
20 (on both sides)
8 (on both sides)
16 (on both sides)
12 (on both sides)
20 (on both sides)
30 (on both sides)
20 (on both sides)
20 (on both sides)
30 (on both sides)
1.
tab. 1-2