Table of Contents
Advertisement
You can choose which month the system will boot up. Set to 0, to boot every day.
Time (hh:mm:ss)
You can choose what hour, minute and second the system will boot up.
Note: If you have changed the setting, you must reset your computer until it goes to the
operating system, before this function will work.
3-9 Miscellaneous Configuration
Init Display First
Reset Configuration Date
Resource Controlled by
* IRQ Resource
PCI /VGA Palette SNOOP
Assign IRQ for VGA
Assign IRQ for USB
PCI Latency Timer (CLK)
* PCI Express Relative Items
Maximum Payload Size
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Reset Configuration Data
If you enable this item and restart the system, any Plug and Play configuration data stored in
the BIOS Setup is cleared from memory.
Init Display First
Use this item to specify whether your graphics adapter is installed in one of the PCI E slots or
is integrated on the motherboard. If a PCI E graphics card is installed, the onboard VGA will
be disabled.
PCI/VGA Palette Snoop
This item is designed to overcome problems that can be caused by some non-standard VGA
cards. This board includes a built-in VGA system that does not require palette snooping so
you must leave this item disabled.
Assign IRQ For USB
Names the interrupt request (IRQ) line assigned to the USB on your system. Activity ofthe
selected IRQ always awakens the system.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
PCI E
Disabled
Auto [ESCD]
Press Enter
Disabled
Enabled
Enabled
[64]
[Disabled]
4096
F6:Optimized Defaults
Menu Level >
F7:Standard Defaults
31
Item Help
Advertisement
Table of Contents
