Miscellaneous Control - JETWAY 754GT7-SLI-G User Manual

Blank Screen
V/H SYNC+Blank
Power Button Function
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state.
The settings are: Delay 4 Sec, Instant-Off.
Wake Up On Ring/PME
During Disabled, the system will ignore any incoming call from the modem. During Enabled,
the system will boot up if there's an incoming call from the modem.
Date(of month) Alarm
You can choose which month the system will boot up. Set to 0, to boot every day.
Time(hh:mm:ss) Alarm
You can choose what hour, minute and second the system will boot up.
Note: If you have change the setting, you must let the system boot up until it goes to the
operating system, before this function will work.

3-9 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CPU Spread Spectrum
SATA Spread Spectrum
PCIE Spread Spectrum
Flash Write Protect
> IRQ Resources
PCI/VGA Palette Snoop
*** PCIExpress Relative Items ***
Maximum Payload Size
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
CPU/SATA/PCIE Spread Spectrum
This item allows you to set the CPU Host / SATA / PCIE clock and Spread Spectrum.
The settings are: Disabled, Down Spread .
IRQ Resources
When resources are controlled manually, assign each system interrupt a type, depending on
the type of device using the interrupt.
Please refer to section 3-9-1
Maximum Payload Size
This setting specifies the maximum TLP payload size for the PCI Express devices. The unit is
byte. Setting options:[128], [256], [512], [1024], [2048], [4096] .
This option only writes blanks to the video buffer.
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
F6:Optimized Defaults
Disabled
Disabled
Disabled
Enabled
Press Enter
Disabled
4096
F7:Standard Defaults
34
Item Help
Menu Level >
F1:General Help