Miscellaneous Control - JETWAY 845GEFC User Manual

Shutdown Temperature
This item can let users setting the Shutdown temperature, w hen CPU temperature over this setting
the system will auto shutdown to protect CPU.

3-11 Miscellaneous Control

This section is for setting CPU Frequency/Voltage Control.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
CPU Clock Ratio
Auto Detect PCI Clk
Spread Spectrum
** Current Host Clock is 100/33MHz **
HOST/PCI Clock at Next Boot is
** Current DRAM Clock is 133MHz **
DRAM Clock at Next Boot is
PCI Clock Ratio
CPU Vcore Select
VAGP Output
VRAM Output
VTT Voltage
VAGP LUV Protect
VRAM LUV Protect
Dua13.3V LUV Protect
Flash Part Write Protect
↑ ↓ → ←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Auto Detect PCI Clk
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host/PCI Clock at Next Boot
This item allows you to select CPU frequency step by step increasing.
The choice are: 100MHz∼200MHz
DRAM Clock at Next Boot is
This item allows you select the DRAM Clock same as Host clock, or can add 33MHz when
Miscellaneous Control
X 8
Enabled
Disabled
100/33MHz
133MHz
Host/3
Default
1.5V (Default)
2.5V (Default)
1/2 VRAM
Enabled
Enabled
Disabled
Enabled
F6:Optimized Defaults
32
Item Help
Menu Level >
F1:General Help
F7:Standard Defaults