Onchip Pci Device - JETWAY HA03 User Manual

IDE DMA transfer access
The integrated peripheral controller contains an IDE interface with support for one IDE channels.
Select Enabled to activate each channel separately. The settings are: Enabled and Disabled.
Primary Master/Slave PIO
The two IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-2) for each of the two
IDE devices that the onboard IDE interface supports. Modes 0 through 2 provide successively
increased performance. In Auto mode, the system automatically determines the best mode for each
device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Primary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
master driver). If your hard drive and your system software both support Ultra DMA/33 and
Ultra DMA/66, select Auto to enable BIOS support. The settings are: Auto, Disabled.
IDE HDD Block Mode
Block mode is also called
IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of
the optimal number of block read/writes per sector the drive can support. The settings are: Enabled,
Disabled.
Onchip SATA Controller
This item allows you to control Serial ATA controller.
3-7-3

Onchip PCI Device

Onboard LAN Device
Onboard Lan Boot Rom
HD Audio
Onchip USB Controller
USB EHCI Controller
USB keyboard Support
Onboard JMB363 SATA
*Onboard JMB363 SATA Type
USB Printer compatibility
↑↓→← Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values
Onboard LAN device
This option allows you to control the onboard LAN device.
HD Audio
This item allows you to decide to enable/disable the chipset family to support onboard HD
audio device. The settings are: Auto, Disabled.
Onchip USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB peripherals. The settings are: Enabled, Disabled.
USB Device Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB device. The settings are: Enabled, Disabled.
quick transfer, multiple commands, or multiple sector read/write. If your
Phoenix – AwardBIOS CMOS Setup Utility
OnChip PCI Function
Enabled
Disabled
Auto
Enabled
Enabled
Enabled
Disabled
Raid Controller
Enabled
F6:Optimized Defaults
(Enabled)
Menu Level >>
F7:Standard Defaults
29
Item Help