Gauge Mode - Uwatec Aladin 2G User Manual

4.

GAUGE MODE

In gauge mode ALL audible and visual alarms
and attention messages are turned off.
In gauge mode Aladin 2G will display depth,
dive time and max depth. By pressing
you can scroll from the max depth to
the temperature, to the average depth,
to the time of day and back to the
max depth. By pressing
restart the stopwatch. This generates
a bookmark. Gauge mode does not
support the calculation of no-stop time
or the supervision of decompression.
Supervision of ppO
will also be switched off. Aladin 2G will
display no information about microbubble
development. The settings for the gas
mixture, MOD and microbubble level
cannot be set and the dive planner cannot
be selected.
Switching the gauge mode on and off
Gauge mode can be switched on and off at
the surface, when there is no desaturation
and no-dive in gauge mode has been made
in the last 48 hours.
• Dives in gauge mode are performed at your
own risk!
• After diving in gauge mode you must
wait for at least 48 hours before using a
decompression computer.
After diving in gauge mode, Aladin 2G can
not be used as dive computer for 48 hours.
Procedure:
SCUBAPRO ALADIN 2G
WARNING
you can
max and CNS O %
2 2
WARNING
4. Gauge mode
1. From the time of day display push
or until the "ALGO" is displayed.
(If Aladin 2G shows " – – – " the gauge
mode cannot be switched "on" or "off".
Aladin 2G shows " – – – " for 48 hours
after a dive in gauge mode and as long
as there is remaining desaturation after
a dive in computer mode.)
2. Confirm with that you wish to
activate or deactivate the gauge mode.
"deco", "gauge" or "apnea" starts
flashing.
3. By pushing or
scroll between: Gauge, Deco (SCUBA
diving) or Apnea. Select: "Gauge".
4. Confirm your settings with
Without confirmation the display will
disappear after 3 minutes and your entries
will not be accepted.
Diving in gauge mode
The following information is displayed in
gauge mode:
DEPTH
DIVE TIME
Current
depth
Stopwatch
Max depth / Gauge icon
Temperature /
Average depth (AVG)
>Temperature
>Average depth (AVG)
>Temperature , Time
>Max depth
The average depth is continuously
updated and represents the time averaged
depth since the beginning of the dive.
You can reset the average depth at any
time by pushing . This generates also
a bookmark.
the mode will
.
Dive
time
33