Perkins SEBU9068-03 Operation And Maintenance Manual page 106

106
Maintenance Section
Fuel System Primary Filter (Water Separator) Element - Replace
6. Tighten the vent screw (1) securely . Remove the
wiring harness from connection (4).
Illustration 64
Typical example
7. Using a suitable tool, remove the filter bowl (6).
Rotate the filter assembly counterclockwise in
order to remove the filter assembly. Use a suitable
tool in order to remove the filter assembly.
8. Rotate the filter element counterclockwise and
remove the filter element (5). Clean the filter bowl.
Install the Element
g03374223
Illustration 65
Typical example
1. Locate the thread in the filter element (8) onto the
threads (9). Spin on the element. Do not tighten.
2. Lubricate the O ring seal (7) with clean engine oil.
Do NOT fill the bowl with fuel before the assembly
is installed.
3. Do NOT use a tool in order to install the filter
assembly. Tighten the filter bowl (6) by hand.
Install the filter bowl (6) and align with your
temporary marks (A).
4. Tighten the valve (2) securely. Remove the
container and dispose of the fuel in a safe place.
SEBU9068-03
g03374224