Perkins SEBU9068-03 Operation And Maintenance Manual page 64

Industrial engine
Table of Contents

Advertisement

64
Maintenance Section
Fluid Recommendations
Diesel Exhaust Fluid (DEF)
The DEF tank capacity for the loose industrial engine
is 19 L (5 US gal).
Fluid Recommendations
• Glossary
• ISO
International Standards Organization
• ASTM
American Society for Testing and
Materials
• HFRR
High Frequency Reciprocating Rig
for Lubricity testing of diesel fuels
• FAME
• CFR
Co-ordinating Fuel Research
• ULSD
• RME
• SME
• EPA
Environmental Protection Agency of
the United States
• PPM
General Information
NOTICE
Every attempt is made to provide accurate, up-to-
date information. By use of this document you agree
that Perkins Engines Company Limited is not respon-
sible for errors or omissions.
NOTICE
These recommendations are subject to change with-
out notice. Contact your local Perkins distributor for
the most up-to-date recommendations.
Diesel Fuel Requirements
Perkins is not in a position to continuously evaluate
and monitor all worldwide distillate diesel fuel
specifications that are published by governments and
technological societies.
The Perkins Specification for Distillate Diesel Fuel
provides a known reliable baseline in order to judge
the expected performance of distillate diesel fuels
that are derived from conventional sources.
i05859273
Fatty Acid Methyl Esters
Ultra Low Sulfur Diesel
Rape Methyl Ester
Soy Methyl Ester
Parts Per Million
Satisfactory engine performance is dependent on the
use of a good quality fuel. The use of a good quality
fuel will give the following results: long engine life and
acceptable exhaust emissions levels. The fuel must
meet the minimum requirements that are stated in
the table 11 .
NOTICE
The footnotes are of the key part Perkins Specifica-
tion for Distillate Diesel Fuel Table. Read ALL of the
footnotes.
SEBU9068-03

Advertisement

Table of Contents
loading

Table of Contents