Table of Contents
Advertisement
70
Maintenance Section
Fluid Recommendations
Aftermarket Fuel Additives
Supplemental diesel fuel additives are not generally
recommended. This recommendation is due to
potential damage to the fuel system or the engine.
Your fuel supplier or the fuel manufacturer will add
the appropriate supplemental diesel fuel additives.
Perkins recognizes the fact that additives may be
required in some special circumstances.
Note: Some anti-corrosion additives can lead to
injector fouling, this fouling can cause the injector to
operate incorrectly.
Contact your fuel supplier for those circumstances
when fuel additives are required. Your fuel supplier
can recommend the appropriate fuel additive and the
correct level of treatment.
Note: For the best results, your fuel supplier should
treat the fuel when additives are required. The
treated fuel must meet the requirements that are
stated in table 11 .
Perkins Diesel Fuel System Cleaner
Perkins T400012 Fuel Cleaner is the only fuel
cleaner that is recommended by Perkins.
If biodiesel or biodiesel blends of fuel are to be used,
Perkins require the use of Perkins fuel cleaner. The
use of the fuel is in order to remove deposits within
the fuel system that is created with the use of
biodiesel. For more information on the use of
biodiesel and biodiesel blends refer to
"Recommendation for Biodiesel and Using B20".
Perkins fuel cleaner will remove deposits that can
form in the fuel system with the use of biodiesel and
biodiesel blends. These deposits can create a loss of
power and engine performance.
Once the fuel cleaner has been added to the fuel, the
deposits within the fuel system are removed after 30
hours of engine operation. For maximum results,
continue to use the fuel cleaner for up to 80 hours.
Perkins fuel cleaner can be used on an on-going
basis with no adverse impact on engine or fuel
system durability.
Details instruction on the rate of which the fuel
cleaner must be use are on the container.
Note: Perkins fuel cleaner is compatible with existing
and U.S. EPA Tier 4 nonroad certified diesel engine
emission control catalysts and particulate filters.
Perkins fuel system cleaner contains less than 15
ppm of sulfur and is acceptable for use with ULSD
fuel.
Fluid Recommendations
General Lubricant Information
Because of government regulations regarding the
certification of exhaust emissions from the engine,
the lubricant recommendations must be followed.
• API
American Petroleum Institute
• SAE
Society Of Automotive Engineers Inc.
• ACEA
Association des Constructers
European Automobiles.
• ECF-3
Licensing
The Engine Oil Licensing and Certification System by
the American Petroleum Institute (API) and the
Association des Constructers European
Automobilesand (ACRA) is recognized by Perkins.
For detailed information about this system, see the
latest edition of the "API publication No. 1509".
Engine oils that bear the API symbol are authorized
by API.
Illustration 32
Typical API symbol
SEBU9068-03
i05859331
Engine Crankcase Fluid
g01987816
Advertisement
Table of Contents
