Table of Contents
Advertisement
SEBU9068-03
Engine Service Requirements
Aggressive properties of biodiesel fuel may cause
debris in the fuel tank and fuel lines. The aggressive
properties of biodiesel will clean the fuel tank and fuel
lines. This cleaning of the fuel system can
prematurely block of the fuel filters. Perkins
recommend that after the initial usage of B20
biodiesel blended fuel the fuel filters must be
replaced at 50 hours.
Glycerides present in biodiesel fuel will also cause
fuel filters to become blocked more quickly. Therefore
the regular service interval should be reduced to 250
hours.
When biodiesel fuel is used, crank case oil and
aftertreatment systems may be influenced. This
influence is due to the chemical composition and
characteristics of biodiesel fuel, such as density and
volatility, and to chemical contaminants that can be
present in this fuel, such as alkali and alkaline metals
(sodium, potassium, calcium, and magnesium).
• Crankcase oil fuel dilution can be higher when
biodiesel or biodiesel blends are used. This
increased level of fuel dilution when using
biodiesel or biodiesel blends is related to the
typically lower volatility of biodiesel. In-cylinder
emissions control strategies utilized in many of the
industrial latest engine designs may lead to a
higher level of biodiesel concentration in the
sump. The long-term effect of biodiesel
concentration in crankcase oil is currently
unknown.
• Perkins recommend the use of oil analysis in
order to check the quality of the engine oil if
biodiesel fuel is used. Ensure that the level of
biodiesel in the fuel is noted when the oil sample is
taken.
Performance Related Issues
Due to the lower energy content than the standard
distillate fuel B20 will cause a power loss in order of 2
to 4 percent. In addition, over time the power may
deteriorate further due to deposits in the fuel
injectors.
Biodiesel and biodiesel blends are known to cause
an increase in fuel system deposits, most significant
of which are deposits within the fuel injector. These
deposits can cause a loss in power due to restricted
or modified fuel injection or cause other functional
issues associated with these deposits.
Note: Perkins T400012 Fuel Cleaner is most
effective in cleaning and preventing the formation of
deposits. Perkins Diesel Fuel Conditioner helps to
limit deposit issues by improving the stability of
biodiesel and biodiesel blends. For more information
refer to "Perkins Diesel Fuel System Cleaner, and
Perkins".
Biodiesel fuel contains metal contaminants (sodium,
potassium, calcium, and/or magnesium) that form
ash products upon combustion in the diesel engine.
The ash can have an impact on the life and
performance of aftertreatment emissions control
devices.
General Requirements
Biodiesel has poor oxidation stability, which can
result in long-term problems in the storage of
biodiesel. Biodiesel fuel should be used within 6
months of manufacture. Equipment should not be
stored with the B20 biodiesel blends in the fuel
system for longer than 3 months.
Due to poor oxidation stability and other potential
issues, it is strongly recommended that engines with
limited operational time either not use B20 biodiesel
blends or, while accepting some risk, limit biodiesel
blend to a maximum of B5. Examples of applications
that should limit the use of biodiesel are the following:
Standby Generator sets and certain emergency
vehicles.
Perkins strongly recommended that seasonally
operated engines have the fuel systems, including
fuel tanks, flashed with conventional diesel fuel
before prolonged shutdown periods. An example of
an application that should seasonally flush the fuel
system is a combine harvester.
Microbial contamination and growth can cause
corrosion in the fuel system and premature plugging
of the fuel filter. Consult your supplier of fuel for
assistance in selecting appropriate anti-microbial
additive.
Water accelerates microbial contamination and
growth. When biodiesel is compared to distillate
fuels, water is naturally more likely to exist in the
biodiesel. It is therefore essential to check frequently
and if necessary, drain the water separator.
Materials such as brass, bronze, copper, lead, tin,
and zinc accelerate the oxidation process of the
biodiesel fuel. The oxidation process can cause
deposits formation therefore these materials must not
be used for fuel tanks and fuel lines.
Fuel for Cold Weather Operation
The European standard "EN590" contains climate
dependant requirements and a range of options. The
options can be applied differently in each country.
There are five classes that are given to arctic
climates and severe winter climates. 0, 1, 2, 3 and 4.
Fuel that complies with "EN590 " CLASS 4 can be
used at temperatures as low as −44 °C (−47.2 °F).
Refer to "EN590" for a detailed discretion of the
physical properties of the fuel.
The diesel fuel "ASTM D975 1-D" used in the United
States of America may be used in very cold
temperatures that are below −18 °C (−0.4 °F).
69
Maintenance Section
Fluid Recommendations
Advertisement
Table of Contents
