Table of Contents
Advertisement
SEBU9068-03
Product Identification
Information
Plate Locations and Film
Locations
Perkins engines are identified by an engine serial
number.
An example of an engine number is
JU*****L000001V.
*****
The list number for the engine
JU
L
000001
V
Perkins dealers or Perkins distributors need all of
these numbers in order to determine the components
that were included with the engine. This information
permits accurate identification of replacement part
numbers.
The numbers for fuel setting information for electronic
engines are stored within the flash file. These
numbers can be read by using the electronic service
tool.
Serial Number location
Illustration 19
Typical example of a non-stressed cylinder block
i05857938
The type of engine
Built in the Italy
Engine Serial Number
Year of Manufacture
g03733236
Product Identification Information
The engine serial number can be installed in three
different positions.
All engines will have the serial number install in
location (1) on the front face of the engine.
On a non-stressed cylinder block the serial number is
located in position (2). On the left-hand side on the
cylinder block.
Illustration 20
Typical example
On a stressed cylinder block the serial number is
located in position (3).
The engine serial number is stamped on the
emissions plate.
Plate Locations and Film
Locations
(Aftertreatment)
Ensure that all numbers on the aftertreatment are
recorded
Your Perkins distributor or your dealer will require all
the numbers in order to identify the components for
your aftertreatment
Product Information Section
g02826736
i05857940
27
Advertisement
Table of Contents
