Table of Contents
Advertisement
AT8402
Table 1-2:
AT8402 Main Specifications (Continued)
AT8402
Backplane (Zone 2)
RTM (Zone 3)
Front Panel
Mechanical
Power Requirements
Temperature
Humidity
Altitude
•
Base channels 1 and 2: 1 x GbE (1000BASE-T)
•
Fabric channels 1 and 2: 4 x GbE (1000BASE-BX)
•
Fabric channels 13 and 14: 2 x GbE (1000BASE-BX)
•
Synchronization Clock: 2 x CLK 1/2/3 (A/B)
•
Update channels 0 to 3: x4 PCIe
•
Update channel 4: 100 MHz PCIe Clock
•
8 generic RTM channels from each AMC Slot
•
4 SAS/SATA/FC interfaces for mass storage
•
2 GbE interfaces to front board switch
•
Serial port for PPC management
•
Fast Ethernet for PPC management
•
I2C IPMI connection
•
Serial port for PPC management
•
8U form factor mechanically compliant to PICMG 3.0 and AMC.0
•
Single slot (6HP)
•
Up to four mid-size/single width AMC slots
•
or up to two mid-size/double width AMC slots
•
280 mm x 322 mm (11.024" x 12.677")
•
150 mm cut away in AMC area
•
Weight: 1.825 kg
•
Typical: 40W
•
Maximum (4 AMCs and RTM): 212W
•
AMCs may consume up to 161W
•
Operating Voltage: -38 to -72 VDC
Designed to meet or exceed the following (Characteristics with AMCs):
•
Air Flow: 30 CFM min
•
Operating: 0°C to +55°C (32°F to 131°F)
•
Non-operating: -40°C to +70°C (-40°F to 158°F)
Designed to meet or exceed the following:
•
Bellcore GR63, Section 4.1
•
Operating: 15%-90% (non-condensing) at 55°C (131°F)
•
Non-Operating: 5%-95% (non-condensing) at 40°C (104°F)
Designed to meet or exceed the following:
•
Operating: 4000 m (13123 ft)
•
Non-operating: 15000 m (49212 ft)
Page 1 - 8
SPECIFICATIONS
Introduction
AT8402 User Guide
Advertisement
Table of Contents
