Related Manuals for Fujitsu LIFEBOOK U749
Summary of Contents for Fujitsu LIFEBOOK U749
- Page 1 System Operating Manual FUJITSU LIFEBOOK U729 FUJITSU LIFEBOOK U749 FUJITSU LIFEBOOK U759...
- Page 2 Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
- Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH 2019. All rights reserved. Publication Date 05/2019 Order No.: A26391-K486-Z320-1-7619, edition 1...
- Page 5 FUJITSU LIFEBOOK U729 FUJITSU LIFEBOOK U749 FUJITSU LIFEBOOK U759 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
- Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
-
Page 7: Table Of Contents
FUJITSU LIFEBOOK U729 ........ - Page 8 Settings in BIOS Setup Utility ............78 Fujitsu...
- Page 9 Index ................. . 93 Fujitsu...
- Page 10 Contents Fujitsu...
-
Page 11: Innovative Technology
The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used. -
Page 12: Notational Conventions
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:... -
Page 13: Ports And Controls
This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device. FUJITSU LIFEBOOK U729 Front 1 = Microphone (optional) - Page 14 (USB Type-C) 3 = USB 3.1 Gen1 port with charging function (USB Type-A, Anytime USB charge) Right side 1 = USB 3.1 Gen1 port (USB Type-A) 3 = LAN port 2 = HDMI port 4 = Security lock device Fujitsu...
- Page 15 Ports and controls Bottom 1 = Battery (SIM card under the battery) 4 = Memory service compartment 2 = Battery release 1 5 = Port replicator port 3 = Service compartment M.2 module 6 = Battery release 2 and LTE module Fujitsu...
-
Page 16: Fujitsu Lifebook U749
Ports and controls FUJITSU LIFEBOOK U749 Front 1 = Microphone (optional) 7 = ON/OFF button 2 = WebCam (optional) 8 = Fingerprint sensor (optional) or palm sensor (optional) 3 = WebCam LED (optional) 9 = Memory card slot 4 = Touchpad... - Page 17 3 = USB port Intel® Thunderbolt with charging function and display port (USB Type-C) Right side 1 = Headset port 4 = LAN port 2 = USB 3.1 Gen1 port (USB Type-A) 5 = Security Lock device 3 = HDMI port Fujitsu...
- Page 18 Ports and controls Bottom 1 = Battery (SIM card under the battery) 4 = Memory service compartment 2 = Battery release 1 5 = Port Replicator port 3 = Service compartment M.2 module 6 = Battery release 2 and LTE module Fujitsu...
-
Page 19: Fujitsu Lifebook U759
Ports and controls FUJITSU LIFEBOOK U759 Front 1 = Microphone (optional) 8 = Separate numeric keypad 2 = WebCam (optional) 9 = Fingerprint sensor (optional) or palm sensor (optional) 3 = WebCam LED (optional) 10 = Memory card slot 4 = Touchpad... - Page 20 3 = USB port Intel® Thunderbolt with charging function and display port (USB Type-C) Right side 1 = Headset port 4 = HDMI port 2 = USB 3.1 Gen1 port (USB Type-A) 5 = LAN port 3 = Displayport 6 = Security lock device Fujitsu...
- Page 21 1 = Battery (SIM card under the battery) 4 = Memory service compartment 2 = Battery release 1 5 = Port Replicator port 3 = Service compartment for hard disk (HDD 6 = Battery release 2 or M.2 module) and LTE module Fujitsu...
-
Page 22: Important Notes
If you have questions about using your notebook in a particular area, please contact your sales outlet or our Hotline/Service Desk. Opening angle of the LCD screen Please open the LCD screen carefully until you feel resistance. Do not try to open it further with force! Fujitsu... -
Page 23: Additional Safety Notes For Devices With Wireless Components
You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment. Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 42"). Fujitsu... -
Page 24: Travelling With Your Notebook
► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► Close the LCD screen. ► To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu... -
Page 25: Cleaning The Notebook
The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. You can use disinfectant wipes to clean the keyboard and the touchpad. Ensure that no liquid enters the device. Fujitsu... -
Page 26: First-Time Setup Of Your Device
► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu... -
Page 27: Selecting A Location
► Connect the power cable (1) to the power adapter provided for the device, see chapter "Technical data", Page ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu... -
Page 28: Switching On The Device For The First Time
If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". -
Page 29: Working With The Notebook
Please refer to the notes in "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the hard disk and the keyboard functions. Fujitsu... - Page 30 "Function keys and key combinations", Page 32). Num Lock indicator Indicator Num Lock Indicator is illuminated: The key has been pressed. The virtual numerical keypad is activated. You can output the characters indicated on the upper right of the keys. Fujitsu...
- Page 31 In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. Scroll Lock indicator Indicator ScrollLock Indicator is illuminated: the key combination has been pressed. The effect that this key has varies between applications. Fujitsu...
-
Page 32: Switching On The Notebook
Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook does not switch itself off automatically, press the ON/OFF button for about five seconds. ► Close the LCD screen. Fujitsu... -
Page 33: Keyboard
The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu... - Page 34 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor control Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...
-
Page 35: Virtual Numeric Keypad
Numeric keypad Virtualnumerickeypad Num Lock LIFEBOOK U729 and LIFEBOOK U749 have virtual number blocks, LIFEBOOK U759 has a separate number block. To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key. -
Page 36: Separate Number Block
Numeric keypad Separatenumeric keypad Num Lock LIFEBOOK U729 and LIFEBOOK U749 have virtual number blocks, LIFEBOOK U759 has a separate number block. The keyboard of your notebook has a separate number block on the far right. Function keys and key combinations... - Page 37 This function key takes a screenshot of the current screen display and saves it to the clipboard. Num Lock This function key activates the virtual number block. The characters found on the upper right of the keys are then output. Fujitsu...
-
Page 38: Keyboard With Background Lighting (Optional)
In battery mode, it is recommended to turn on the backlight only when needed and to use the lower brightness level to maximize battery life. Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Fujitsu... -
Page 39: Touchpad And Touchpad Buttons
► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu... -
Page 40: Dragging Items
LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture. -
Page 41: Using Fingers
fingers together. Input fields Data must be entered for some apps, for instance an Internet page or your name and password. ► Tap on the input field. An on-screen keyboard opens, with which you can enter your data. Fujitsu... -
Page 42: Webcam
LCD screen may flicker while the light level is adjusted. Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam. Fujitsu... -
Page 43: Rechargeable Battery
If you do not intend to use a battery for long periods of time, remove it from the notebook. Never store a battery in the device. If the device will not be used for a period of more than two days, remove the batteries from the device so that their state of charge is maintained. Fujitsu... -
Page 44: Removing And Installing The Battery
Make sure that no foreign bodies get into the battery connections. Never store a battery for long periods in the discharged state. This can make it impossible to recharge. The LIFEBOOK U749 is shown below. The procedure is the same for all three device variants. Removing a battery ►... - Page 45 ► Position the battery at the edge. ► Insert the battery into the battery compartment until it engages positively (1) ► Slide the locking device (2) in the direction of the arrow. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...
-
Page 46: Using The Power-Management Features
If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu... -
Page 47: Adjusting Fan Control
"Settings in BIOS Setup Utility", Page With the Fujitsu Utility Function Manager you can also switch between these two settings with Windows. In the Function Manager, select the Fan menu item with the options Quiet Mode (corresponds to Silent) and Normal Mode. -
Page 48: Memory Cards
(see the documentation for your operating system). ► On devices with card locking: Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu... -
Page 49: Loudspeakers And Microphones
If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu... -
Page 50: Sim Card (Configuration Dependent)
Working with the notebook SIM card (configuration dependent) The LIFEBOOK U749 is shown below. The procedure is the same for all three device variants. All device variants support Micro SIM cards (15 mm × 12 mm). A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or notebook and, together with an integrated LTE module, enables access to a mobile radio network. - Page 51 ► Pull the SIM card holder out of the slot (2). ► Insert the SIM card (3) into the SIM card holder as shown in the diagram on the SIM card holder. ► Push the SIM card holder back into the slot (4). Fujitsu...
-
Page 52: Removing The Sim Card
Removing the SIM card ► Prepare for removal of the SIM card, see chapter "Preparing to remove components", Page ► Remove the battery, see "Removing a battery", Page ► Snap the locking mechanism in the direction of the arrow (1). Fujitsu... - Page 53 Working with the notebook ► Pull the SIM card holder out of the slot (2). ► Remove the SIM card from the SIM card holder (3). ► Push the SIM card holder back into the slot (4). Fujitsu...
-
Page 54: Wireless Components Wireless Lan / Bluetooth / Lte
► Complete the removal, see chapter "Finishing component removal", Page Wireless components Wireless LAN / Bluetooth / LTE The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ►... -
Page 55: Setting Up Wlan Access
Access via LTE You can purchase the accessories for LTE reception from your retailer or your Fujitsu Technology Solutions dealer. If you have ordered an LTE module, your device will already be prepared when you receive it. -
Page 56: Ethernet And Lan
Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Use a shielded network cable (CAT 5e). Fujitsu... -
Page 57: Your Port Replicator
13 = Security Lock device 5 = Unlocking lever 6 = DC jack socket (DC IN) 7 = USB 3.1 Gen1 port with charging function (USB Type-C™) The DVI port and the neighbouring Displayport cannot be used at the same time. Fujitsu... -
Page 58: Connecting The Notebook To The Port Replicator
► Position the notebook so that it is in line with the back edge of the Port Replicator. ► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly. If necessary, secure the notebook and port replicator by closing the key lock on the port replicator. Fujitsu... -
Page 59: Connecting The Mains Adapter To The Port Replicator
Port Replicator of the same type. Switching on the notebook via the port replicator ► Press the ON/OFF button on the port replicator to switch the notebook on. The power-on indicator of the Port Replicator lights up. Fujitsu... -
Page 60: Disconnecting The Notebook From The Port Replicator
► Turn the key in the direction of the arrow (1) to unlock the port replicator. ► Pull the unlocking lever in the direction of the arrow (2), until you hear the notebook unlatch. ► Lift off the notebook (3). Fujitsu... -
Page 61: Security Functions
If you change the Password Severity setting from Strong to Stringent in the Security BIOS Setup Utility menu, the Fujitsu Service Desk can no longer reset the password. In this case, the system can remain permanently unusable. -
Page 62: Configuring The Palm Vein Sensor
Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook. -
Page 63: Configuring Password Protection In Bios Setup Utility
If you change the Password Severity setting from Strong to Stringent in the Security BIOS Setup Utility menu, the Fujitsu Service Desk can no longer reset the password. In this case, the system can remain permanently unusable. - Page 64 ► Press the Enter key twice. ► In the Exit menu, select the option Save Changes & Exit. ► Select Yes and press the Enter key. The notebook will now reboot with the password removed. Removing the supervisor password simultaneously deactivates the user password. Fujitsu...
-
Page 65: Password Protection For Booting Of The Operating System
If a supervisor password has been assigned, a password for the hard disk can also be set in the Hard Disk Security menu. The hard disk is protected by this password. Data on this hard disk can only be read into another system if the correct password has been entered. Fujitsu... -
Page 66: Trusted Platform Module (Tpm) (Device-Dependent)
► Select the "Security Chip" "Disabled" entry to deactivate the TPM ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu... -
Page 67: Smartcard Reader
SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard. -
Page 68: Connecting External Devices
For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu... -
Page 69: Connecting An External Monitor
Digital DVI-D monitor port (on the optional Port Replicator) ► Switch off the notebook and the external monitor. ► Plug the data cable of the external monitor into the monitor port. ► First switch on the external monitor and then the notebook. Fujitsu... - Page 70 "Function keys and key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. If you wish to operate the monitor via a DVI port, use the optional Port Replicator available for your notebook. Fujitsu...
-
Page 71: Connecting Usb Devices
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu... -
Page 72: Usb Port Intel® Thunderbolt Tm 3 With Charging Function And Display Port (Usb Type-C)
Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to the USB port Intel® Thunderbolt 3 with charging function and display port (USB Type-C) of the notebook. Fujitsu... -
Page 73: Usb Port With Charging Function (Anytime Usb Charge)
► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu... -
Page 74: Headset Port
If you buy a cable from a retailer, please note the following information: The headset port on your notebook is a "3.5 mm jack socket". If you want to connect a headset, headphones or loudspeakers, you will need a "3.5 mm jack plug". Fujitsu... -
Page 75: Removing And Installing Components During Servicing
The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu... -
Page 76: Preparing To Remove Components
Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu... -
Page 77: Removing A Cover
► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu... -
Page 78: Installing A Memory Module
► Carefully push the memory module downwards until you feel it click into place (2). Attaching the cover ► Place the cover in the correct mounting position (1). ► Tighten the screw (2). ► Complete the installation, see "Finishing component removal", Page Fujitsu... -
Page 79: Installing And Removing An M.2 Module
If you install the wrong screws, components may be damaged. The screws are not all the same length and when the cover is installed, the correct screws must be used. ► Lift the cover off the notebook (2). Fujitsu... -
Page 80: Installing An M.2 Module
Removing an M.2 module ► Undo the screw (1). The M.2 module snaps slightly upwards. ► Pull the M.2 module in the direction of the arrow (2) and out of the slot on the mainboard and remove it from the casing. Fujitsu... -
Page 81: Attaching The Cover
► Install the battery again (see "Installing a battery", Page 41). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu... -
Page 82: Settings In Bios Setup Utility
► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu... -
Page 83: Operating The Bios Setup Utility
► Select the option that you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (e.g. in this manual). Fujitsu... -
Page 84: Exiting Bios Setup Utility
► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu... -
Page 85: Troubleshooting And Tips
PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"... -
Page 86: Restore Contents Of The Hard Disk From Recovery Cd/Dvd
If necessary, you can reset your system to the original state of the hard disk. ► Select Settings from the Start menu. ► Select Update & security. ► Select Recovery. ► Select according to your requirements from the options given. Fujitsu... -
Page 87: The Notebook's Date Or Time Is Incorrect
"Function keys and key combinations", Page The LCD screen is difficult to read LCDscreen LCDscreen Cause Troubleshooting Reflected glare ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. Fujitsu... -
Page 88: The External Monitor Remains Blank
Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu... -
Page 89: The Notebook Cannot Be Started
► Close the application program or restart malfunction. the notebook (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. Fujitsu... -
Page 90: The Printer Does Not Print
Your SmartCard must comply with the ISO standard 7816-1, -2, -3 and -4. SmartCard PIN forgotten Troubleshooting Cause PIN forgotten ► If you are working in a network, contact your system administrator, who can unlock your notebook with a Supervisor PIN. Fujitsu... -
Page 91: Smartcard Lost
Troubleshooting and tips SmartCard lost Cause Troubleshooting SmartCard lost ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Fujitsu... -
Page 92: Error Messages On The Screen
Press <F1> to resume, <F2> to SETUP operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating system. BIOS Setup. Fujitsu... - Page 93 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...
-
Page 94: Technical Data
Approved memory 4 GByte, 8 GByte or 16 GByte DDR4 - 2400 MHz SO-DIMM modules The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at "http://www.fujitsu.com/fts/support/". Fujitsu... -
Page 95: Rechargeable Battery
Technical data Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/". LIFEBOOK U729: LIFEBOOK U749/U759: 3-cell battery 45Wh 4-cell battery 50 Wh Rated voltage 10.8 V 14.4 V Rated capacity 4170 mAh... -
Page 96: Manufacturer's Notes
If the battery is not replaceable by the user, have it replaced and disposed of by an authorized service provider. You can find information on this subject on your notebook or on our website ("https://www.fujitsu.com/emeia/about/local/csr/recycling/"). Other certification markings Certification markings Any other certification markings are listed in the "Manual Appendix -... -
Page 97: Index
81 Components Fingerprint sensor 57 installing / removing 71 configure 57 Configuration, BIOS Setup Utility 78 First-time setup Connecting audio devices 70 Fn key 30 Connecting headphones 70 Ctrl+Alt+Del 34 Cursor control 30 Getting started 22 Cursor keys 30 Fujitsu... - Page 98 Operating system, restoring 82 setting up 23 Mechanical backup 58 Memory card Packaging 22 handling 44 Palm vein sensor 58 inserting 44 Configuring 58 removing 44 Password Memory expansion changing 60 installing 74 entering 60 removing 73 removing 60 Fujitsu...
- Page 99 Using the Kensington Lock Cable 58 Memory cards 44 Standby indicator 26 Status indicators 25 VGA connection socket 65 Supervisor password Virtual numeric keypad 31 changing 60 Volume entering 60 decrease 33 removing 60 increase 33 Switching on Volume control 45 Fujitsu...
- Page 100 Index switch on 33 Webcam 38 Wireless LAN Windows key 30 Switching the module off 50 Wireless component: Switching the module on 50 safety notes 19 Wireless LAN: Wireless components safety notes 19 switch off 33 Fujitsu...