Fujitsu LIFEBOOK U7410 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. LIFEBOOK U7410
  6. Operating manual

Fujitsu LIFEBOOK U7410 Operating Manual

Hide thumbs Also See for LIFEBOOK U7410:
Table of Contents

Advertisement

Quick Links

System
Operating Manual
FUJITSU LIFEBOOK U7410
FUJITSU LIFEBOOK U7510

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LIFEBOOK U7410

Summary of Contents for Fujitsu LIFEBOOK U7410

  • Page 1 System Operating Manual FUJITSU LIFEBOOK U7410 FUJITSU LIFEBOOK U7510...
  • Page 2 Internet at: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk ("http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
  • Page 4 Issued by / EU importer Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH2020. All rights reserved. Publication Date 05/2020 Order No.: A26391-K503-Z321-1-7619, edition 1...
  • Page 5 FUJITSU LIFEBOOK U7410 FUJITSU LIFEBOOK U7510 Operating Manual Innovative technology Ports and controls Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility...
  • Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.

  • Page 7: Table Of Contents

    FUJITSU LIFEBOOK U7410 ........
  • Page 8 Settings in BIOS Setup Utility ............75 Fujitsu...
  • Page 9 Index ................. . 92 Fujitsu...
  • Page 10 Contents Fujitsu...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    "Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:...

  • Page 13: Ports And Controls

    This chapter presents the individual hardware components of your device. It gives an overview of the indicators and ports of the device. Please familiarise yourself with these components before you start to work with the device. FUJITSU LIFEBOOK U7410 Front 1 = Microphone (optional)
  • Page 14 3 = USB port Intel® Thunderbolt with charging function and display port (USB Type-C) Right side 1 = Headset port 4 = LAN port 2 = USB port 3.2 Gen1 (USB Type-A) 5 = Security Lock device 3 = HDMI port Fujitsu...
  • Page 15 Ports and controls Bottom 1 = Battery (SIM card under the battery) 4 = Memory service compartment 2 = Battery release 1 5 = Port replicator port 3 = Service compartment M.2 module 6 = Battery release 2 and LTE module Fujitsu...

  • Page 16: Fujitsu Lifebook U7510

    Ports and controls FUJITSU LIFEBOOK U7510 Front 1 = Microphone (optional) 9 = ON/OFF button 2 = WebCam-Shutter (optional) 10 = Separate numeric keypad 3 = WebCam (optional) 11 = Fingerprint sensor (optional) or palm sensor (optional) 4 = Infrared camera sensors (optional)
  • Page 17 3 = USB port Intel® Thunderbolt with charging function and display port (USB Type-C) Right side 1 = Headset port 4 = HDMI port 2 = USB port 3.2 Gen1 (USB Type-A) 5 = LAN port 3 = Displayport 6 = Security lock device Fujitsu...
  • Page 18 1 = Battery (SIM card under the battery) 4 = Memory service compartment 2 = Battery release 1 5 = Port Replicator port 3 = Service compartment for hard disk (HDD 6 = Battery release 2 or M.2 module) and LTE module Fujitsu...

  • Page 19: Important Notes

    If you have questions about using your notebook in a particular area, please contact your sales outlet or our Hotline/Service Desk. Opening angle of the LCD screen Please open the LCD screen carefully until you feel resistance. Do not try to open it further with force! Fujitsu...

  • Page 20: Additional Safety Notes For Devices With Wireless Components

    You will then be able to work for longer before having to recharge the battery. Energy efficiency is increased and the environmental impact is reduced. You save money while protecting the environment. Energy saving under Windows ► Make use of the power management features (see ""Using the power-management features", Page 39"). Fujitsu...

  • Page 21: Travelling With Your Notebook

    ► Unplug the mains adapter and all external devices from the power socket. ► Disconnect the mains adapter cable and the data cables for all external devices. ► Close the LCD screen. ► To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu...

  • Page 22: Cleaning The Notebook

    The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. You can use disinfectant wipes to clean the keyboard and the touchpad. Ensure that no liquid enters the device. Fujitsu...

  • Page 23: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu...

  • Page 24: Selecting A Location

    ► Connect the power cable (1) to the power adapter provided for the device, see chapter "Technical data", Page ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu...

  • Page 25: Switching On The Device For The First Time

    If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet under "http://www.fujitsu.com/fts/support/". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com".

  • Page 26: Working With The Notebook

    Please refer to the notes in "Important notes", Page Status indicators Statusindicators The status indicators provide information about the status of the power supply, the hard disk and the keyboard functions. Fujitsu...
  • Page 27 In the case of overlay keys, the character printed on the upper left of the key will appear when that key is pressed. Scroll Lock indicator Indicator ScrollLock Indicator is illuminated: the key combination has been pressed. The effect that this key has varies between applications. Fujitsu...

  • Page 28: Switching On The Notebook

    Back up your data and close all applications before you switch off your device. Otherwise data might be lost. ► Shut down the operating system correctly. Notebook ► If the notebook does not switch itself off automatically, press the ON/OFF button for about 5-10 seconds. ► Close the LCD screen. Fujitsu...

  • Page 29: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu...
  • Page 30 The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor control Windows key The Windows key switches between the start screen and the last used application. Windowskey Menu key The Menu key opens the menu for the active application. Fujitsu...

  • Page 31: Virtual Numeric Keypad

    Numeric keypad Virtualnumerickeypad Num Lock LIFEBOOK U7410 has a virtual number pad, whereas LIFEBOOK U7510 has a separate number pad. To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key.

  • Page 32: Separate Number Block

    Numeric keypad Separatenumeric keypad Num Lock LIFEBOOK U7410 has a virtual number pad, whereas LIFEBOOK U7510 has a separate number pad. The keyboard of your notebook has a separate number block on the far right. Function keys and key combinations...
  • Page 33 This function key takes a screenshot of the current screen display and saves it to the clipboard. Num Lock This function key activates the virtual number block. The characters found on the upper right of the keys are then output. Fujitsu...

  • Page 34: F-Lock Setting

    The hot key functions are the The function keys become the symbol is illuminated) secondary behaviour: primary behaviour: ► They are used by pressing ► They are used by simply + the hot key. pressing the corresponding function key. Fujitsu...

  • Page 35: Keyboard With Background Lighting (Optional)

    In battery mode, it is recommended to turn on the backlight only when needed and to use the lower brightness level to maximize battery life. Country and keyboard settings ► Change the country and keyboard settings as described in the documentation for your operating system. Fujitsu...

  • Page 36: Touchpad And Touchpad Buttons

    ► Tap the touchpad once or press the left button once. The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice. The command is executed. Fujitsu...

  • Page 37: Dragging Items

    LCDscreen Notes High-quality LCD screens (TFT) are installed in Fujitsu notebooks. For technical reasons, these screens are manufactured for a certain resolution. An optimum and sharp image can only be ensured with the resolution intended for the particular screen. A screen resolution which differs from the specification can result in an unclear picture.

  • Page 38: Using Fingers

    fingers together. Input fields Data must be entered for some apps, for instance an Internet page or your name and password. ► Tap on the input field. An on-screen keyboard opens, with which you can enter your data. Fujitsu...

  • Page 39: Webcam And Infrared Camera

    LCD screen may flicker while the light level is adjusted. Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam. Fujitsu...

  • Page 40: Rechargeable Battery

    If you do not intend to use a battery for long periods of time, remove it from the notebook. Never store a battery in the device. If the device will not be used for a period of more than two days, remove the batteries from the device so that their state of charge is maintained. Fujitsu...

  • Page 41: Removing And Installing The Battery

    Never store a battery for long periods in the discharged state. This can make it impossible to recharge. The LIFEBOOK U7410 is shown below. The procedure is the same for all device variants. Removing a battery ► Prepare for removal, see chapter "Preparing to remove components", Page...
  • Page 42 ► Position the battery at the edge. ► Insert the battery into the battery compartment until it engages positively (1) ► Slide the locking device (2) in the direction of the arrow. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu...

  • Page 43: Using The Power-Management Features

    If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu...

  • Page 44: Adjusting Fan Control

    "Settings in BIOS Setup Utility", Page With the Fujitsu Utility Function Manager you can also switch between these two settings with Windows. In the Function Manager, select the Fan menu item with the options Quiet Mode (corresponds to Silent) and Normal Mode.

  • Page 45: Memory Cards

    (see the documentation for your operating system). ► On devices with card locking: Press on the memory card (1). Memory card The memory card is released and can now be removed. ► Pull the memory card out of the slot (2). Fujitsu...

  • Page 46: Loudspeakers And Microphones

    If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu...

  • Page 47: Sim Card (Configuration Dependent)

    Working with the notebook SIM card (configuration dependent) The LIFEBOOK U7410 is shown below. The procedure is the same for all device variants. All device variants support Micro SIM cards (15 mm × 12 mm). All device variants also support the eSIM function. For information, please contact your network provider.
  • Page 48 ► Pull the SIM card holder out of the slot (2). ► Insert the SIM card (3) into the SIM card holder as shown in the diagram on the SIM card holder. ► Push the SIM card holder back into the slot (4). Fujitsu...

  • Page 49: Removing The Sim Card

    Removing the SIM card ► Prepare for removal of the SIM card, see chapter "Preparing to remove components", Page ► Remove the battery, see "Removing a battery", Page ► Snap the locking mechanism in the direction of the arrow (1). Fujitsu...
  • Page 50 Working with the notebook ► Pull the SIM card holder out of the slot (2). ► Remove the SIM card from the SIM card holder (3). ► Push the SIM card holder back into the slot (4). Fujitsu...

  • Page 51: Wireless Components Wireless Lan / Bluetooth / Lte

    ► Complete the removal, see chapter "Finishing component removal", Page Wireless components Wireless LAN / Bluetooth / LTE The installation of radio components not approved by Fujitsu will invalidate the certifications issued for this device. Switching the wireless components on and off ►...

  • Page 52: Setting Up Wlan Access

    Access via LTE You can purchase the accessories for LTE reception from your retailer or your Fujitsu Technology Solutions dealer. If you have ordered an LTE module, your device will already be prepared when you receive it.

  • Page 53: Ethernet And Lan

    Your network administrator can help you to configure and use the LAN connections. The network cable is not included in the delivery scope. This type of cable can be obtained from a specialist dealer. Use a shielded network cable (CAT 5e). Fujitsu...

  • Page 54: Your Port Replicator

    13 = Security Lock device 5 = Unlocking lever 6 = DC jack socket (DC IN) 7 = USB 3.2 Gen1 port with charging function (USB Type-C™) The DVI port and the neighbouring Displayport cannot be used at the same time. Fujitsu...

  • Page 55: Connecting The Notebook To The Port Replicator

    ► Position the notebook so that it is in line with the back edge of the Port Replicator. ► Place the notebook onto the Port Replicator (1) and ensure that it locks into place correctly. If necessary, secure the notebook and port replicator by closing the key lock on the port replicator. Fujitsu...

  • Page 56: Connecting The Mains Adapter To The Port Replicator

    Port Replicator of the same type. Switching on the notebook via the port replicator ► Press the ON/OFF button on the port replicator to switch the notebook on. The power-on indicator of the Port Replicator lights up. Fujitsu...

  • Page 57: Disconnecting The Notebook From The Port Replicator

    ► Turn the key in the direction of the arrow (1) to unlock the port replicator. ► Pull the unlocking lever in the direction of the arrow (2), until you hear the notebook unlatch. ► Lift off the notebook (3). Fujitsu...

  • Page 58: Security Functions

    If you change the Password Severity setting from Strong to Stringent in the Security BIOS Setup Utility menu, the Fujitsu Service Desk can no longer reset the password. In this case, the system can remain permanently unusable.

  • Page 59: Configuring The Palm Vein Sensor

    Kensington Lock Cable, a sturdy steel cable, to help protect your notebook from theft. The Kensington Lock Cable is available as an accessory. Fujitsu recommends the use of a combination lock. ► Fit the Kensington Lock Cable to the mechanism on your notebook.

  • Page 60: Configuring Password Protection In Bios Setup Utility

    If you change the Password Severity setting from Strong to Stringent in the Security BIOS Setup Utility menu, the Fujitsu Service Desk can no longer reset the password. In this case, the system can remain permanently unusable.
  • Page 61 ► Press the Enter key twice. ► In the Exit menu, select the option Save Changes & Exit. ► Select Yes and press the Enter key. The notebook will now reboot with the password removed. Removing the supervisor password simultaneously deactivates the user password. Fujitsu...

  • Page 62: Password Protection For Booting Of The Operating System

    If a supervisor password has been assigned, a password for the hard disk can also be set in the Hard Disk Security menu. The hard disk is protected by this password. Data on this hard disk can only be read into another system if the correct password has been entered. Fujitsu...

  • Page 63: Trusted Platform Module (Tpm) (Device-Dependent)

    ► Select the "Security Chip" "Disabled" entry to deactivate the TPM ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes. Your notebook will now restart and TPM will be disabled. Fujitsu...

  • Page 64: Smartcard Reader

    SmartCard with you. In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.

  • Page 65: Connecting External Devices

    For more information about whether or not devices need to be switched off, please refer to the documentation supplied with the external device. Some of the external devices require special drivers (see the operating system and external device documentation). Fujitsu...

  • Page 66: Connecting An External Monitor

    Digital HDMI port (on LIFEBOOK) Replicator) ► Switch off the notebook and the external monitor. ► Plug the data cable of the external monitor into the monitor port. ► First switch on the external monitor and then the notebook. Fujitsu...
  • Page 67 "Function keys and key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. If you wish to operate the monitor via a DVI port, use the optional Port Replicator available for your notebook. Fujitsu...

  • Page 68: Connecting Usb Devices

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu...

  • Page 69: Usb Port Intel® Thunderbolt Tm 3 With Charging Function And Display Port (Usb Type-C)

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to the USB port Intel® Thunderbolt 3 with charging function and display port (USB Type-C) of the notebook. Fujitsu...

  • Page 70: Usb Port With Charging Function (Anytime Usb Charge)

    ► Left click on the icon to safely remove hardware, located in the taskbar. ► Select the device which you want to shut down and remove. ► Press the Enter key. Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu...

  • Page 71: Headset Port

    If you buy a cable from a retailer, please note the following information: The headset port on your notebook is a "3.5 mm jack socket". If you want to connect a headset, headphones or loudspeakers, you will need a "3.5 mm jack plug". Fujitsu...

  • Page 72: Removing And Installing Components During Servicing

    The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu...

  • Page 73: Preparing To Remove Components

    Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu...

  • Page 74: Removing A Cover

    ► Lift the cover off the notebook (2). Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu...

  • Page 75: Installing A Memory Module

    ► Carefully push the memory module downwards until you feel it click into place (2). Attaching the cover ► Place the cover in the correct mounting position (1). ► Tighten the screw (2). ► Complete the installation, see "Finishing component removal", Page Fujitsu...

  • Page 76: Installing And Removing An M.2 Module

    If you install the wrong screws, components may be damaged. The screws are not all the same length and when the cover is installed, the correct screws must be used. ► Lift the cover off the notebook (2). Fujitsu...

  • Page 77: Installing An M.2 Module

    Removing an M.2 module ► Undo the screw (1). The M.2 module snaps slightly upwards. ► Pull the M.2 module in the direction of the arrow (2) and out of the slot on the mainboard and remove it from the casing. Fujitsu...

  • Page 78: Attaching The Cover

    ► Install the battery again (see "Installing a battery", Page 38). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu...

  • Page 79: Settings In Bios Setup Utility

    ► Press the function key ► If a password has been assigned, enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our customer service centre. The BIOS Setup Utility starts. Fujitsu...

  • Page 80: Operating The Bios Setup Utility

    ► Select the option that you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (e.g. in this manual). Fujitsu...

  • Page 81: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes. The changes are saved. Your device is shut down. Fujitsu...

  • Page 82: Erase Disk

    Settings in BIOS Setup Utility Erase Disk Erase Disk is a Fujitsu Technology Solutions feature embedded in the system firmware (UEFI: Unified Extensible Firmware Interface), to erase all data from SATA hard disk(s) or SSDs. This function can be used to delete all data from internal or external hard disks or SSDs connected via the eSATA port, before the hard disks are discarded or the complete computer system is disposed of.
  • Page 83 • Reset administrator and user password • Load BIOS setup defaults • Shutdown the Computer • Exit Erase Disk with no additional options upon completion ► Select the function which you require. The deletion process starts. Fujitsu...

  • Page 84: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://support.ts.fujitsu.com/Download/Index.asp"...

  • Page 85: Restore Contents Of The Hard Disk From Recovery Cd/Dvd

    If necessary, you can reset your system to the original state of the hard disk. ► Select Settings from the Start menu. ► Select Update & security. ► Select Recovery. ► Select according to your requirements from the options given. Fujitsu...

  • Page 86: The Notebook's Date Or Time Is Incorrect

    "Function keys and key combinations", Page The LCD screen is difficult to read LCDscreen LCDscreen Cause Troubleshooting Reflected glare ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. Fujitsu...

  • Page 87: The External Monitor Remains Blank

    Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu...

  • Page 88: The Notebook Cannot Be Started

    ► Close the application program or restart malfunction. the notebook (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. Fujitsu...

  • Page 89: The Printer Does Not Print

    Your SmartCard must comply with the ISO standard 7816-1, -2, -3 and -4. SmartCard PIN forgotten Cause Troubleshooting PIN forgotten ► If you are working in a network, contact your system administrator, who can unlock your notebook with a Supervisor PIN. Fujitsu...

  • Page 90: Smartcard Lost

    Troubleshooting and tips SmartCard lost Cause Troubleshooting SmartCard lost ► If you are working in a network, contact your system administrator, who can boot up your notebook with a Supervisor SmartCard. Fujitsu...

  • Page 91: Error Messages On The Screen

    Press <F1> to resume, <F2> to SETUP operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating system. BIOS Setup. Fujitsu...
  • Page 92 System battery is dead - Replace and run SETUP service centre. ► Contact your sales outlet or our customer System cache error - Cache disabled service centre. ► Contact your sales outlet or our customer System timer error service centre. Fujitsu...

  • Page 93: Technical Data

    The data sheet for the device provides further technical data. You will find the data sheet on your device or on the Internet at "http://www.fujitsu.com/fts/support/". Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://www.fujitsu.com/fts/support/".

  • Page 94: Mains Adapter (Notebook Computer)

    50 Hz to 60 Hz (automatic) Secondary Nominal power 80 W / 90 W Rated voltage 19 V Maximum rated current 4.22 A / 4.74 A An additional mains adapter or power cable can be ordered at any time. Fujitsu...

  • Page 95: Manufacturer's Notes

    TCO Certified TCOCertified Please note that TCO-certified systems bear the "TCO certified" logo. Further information is given in the "TCO certified" manual appendix at "http://support.ts.fujitsu.com/Manuals/". Other certification markings Certification markings Any other certification markings are listed in the "Manual Appendix - Additional Certifications"...

  • Page 96: Index

    Fingerprint sensor 54 Cleaning 18 configure 54 Components First-time setup installing / removing 68 Fn key 26 Configuration, BIOS Setup Utility 75 Connecting audio devices 67 Connecting headphones 67 Getting started 19 Ctrl+Alt+Del 30 Cursor control 26 Cursor keys 26 Fujitsu...
  • Page 97 20 Mechanical backup 55 Memory card Packaging 19 handling 41 Palm vein sensor 55 inserting 41 Configuring 55 removing 41 Password Memory expansion changing 57 installing 71 entering 57 removing 70 removing 57 Memory module Password protection 56 Fujitsu...
  • Page 98 Using the Kensington Lock Cable 55 Standby indicator 23 Status indicators 22 Supervisor password VGA connection socket 62 changing 57 Virtual numeric keypad 27 entering 57 Volume removing 57 decrease 28 Switching on increase 29 the notebook 24 Volume control 42 Fujitsu...
  • Page 99 Index switch on 29 Webcam 35 Wireless LAN Windows key 26 Switching the module off 47 Wireless component: Switching the module on 47 safety notes 16 Wireless LAN: Wireless components safety notes 16 switch off 29 Fujitsu...

This manual is also suitable for:

Lifebook u7510

Table of Contents