Daikin Modular L Smart Service Manual page 76

ESIE19-06 | Part 5. Appendix
4. Press the Up/Down buttons to select the required ventilation mode. For more information about ventilation modes, see Ventilation modes in the installer and user reference guide.
Ventilation modes
You can change the ventilation mode in the main menu.
Mode
Auto mode
Energy Reclaim Ventilation mode
Bypass mode
Time to clean filter indication
When it is time to clean the filters, the following message or icon shows at the bottom of the basic screen: time to clean the filter.
To remove time to clear filter indication
Press the Menu/Enter button.
Press the Up/Down buttons to select Reset Filter Indicator.
Press the Menu/Enter button.
About error indications
If an error occurs, there is an error icon in the basic screen and the operation lamp blinks. If a warning occurs, ONLY the error icon blinks and the operation lamp does NOT. Press the
Menu/Enter button to display the error code or warning and contact information.
The error code blinks and the contact address and model name appear as shown below.
In this case, notify your Daikin dealer about the error code.
Page 76
Description
Using information from the air conditioner (cooling, heating, fan, and set temperature) and heat reclaim ventilation unit (indoor and outdoor
temperatures), this mode automatically changes between Energy Reclaim Ventilation and Bypass mode.
The outdoor air is supplied to the room after passing through a heat exchange element, where heat is exchanged with the return air.
The outdoor air bypasses the heat exchange element. This means that outdoor air is supplied to the room without heat exchange with the return air.
Modular L Smart
5.1. Field setting
21/01/20 | Version 1.1