Vacuum Cleaner Assembly; Emptying The Dust Tank - Tesla PureStar E60 Manual

VACUUM CLEANER ASSEMBLY

1.
2.
If the battery status indicator (6) flashes, charge the battery. The battery charge status is
indicated by the gradual lighting of the Battery Status Indicator. When charging, the indicator
lights up red. When fully charged, this color changes to blue. When fully charged, disconnect
the charger from the wall outlet.
3.
4.
Use the On/Off button to turn on the device. You can switch between MIN or MAX modes by pressing
the power control button. To switch off the vacuum cleaner, press the On/Off button again.

EMPTYING THE DUST TANK

We recommend emptying the dust tank and cleaning the filters after each cleaning for hygienic
reasons. To empty the dust tank, press the button on its lid and empty the contents into the waste bin.
Insert the battery into the slot in the
body of the vacuum cleaner.
Connect the power supply to the
battery. When fully charged, unplug the
charger. You can charge the battery
either inserted in the body of the
vacuum cleaner or separately.
Connect the turbo brush to the flexible
tube and then connect the tube to the
body of the vacuum cleaner.
You can connect the vacuuming
attachments directly to the body of the
vacuum cleaner or to a flexible tube.