Ink Tube Replacement - Roland VersaCamm VS-640 Service Notes

3-20 INK TUBE REPLACEMENT

Turn on the Main Power SW, and then turn on the Sub Power
1
SW while pressing the left, right and down keys to enter the
Service Mode.
Select [SERVICE MENU]>[SUB MENU]>[PUMP UP], and
2
take out the ink in the Ink Tube by following the messages
on the LCD panel. It takes about 35 minutes to finish [PUMP
UP].
When you perform [PUMP UP], you have to use six
Dummy Cartridges. Do not use the Dummy Car-
tridge which has been used for more than 10 times.
If you use such Dummy Cartridge, the ink line may
not be sealed completely.
Turn off the Sub Power SW, and then turn off the Main Power
3
SW.
Remove the following covers in order.
4
1. Right Cover
2. Right Top Cover
3. Chassis Cover
4. Front Cover
5. Front Rail Cover
6. Left Cover
7. Ink Cartridge Cover
8. Top Cover
OFF
Left Cover
Front Rail Cover
Front Cover
3-96
+
MENU
MENU
SERVICE MENU
SERVICE MENU
SUB MENU
[ ] [ ]
SUB MENU
PUMP UP
[ ]
EMPTY
DRAIN BOTTLE
ENTER
REMOVE SOL CTR.
12345678
PUMPING-UP
>>>>>
Ink Cartridge Cover
Top Cover
Chassis Cover
Right Top Cover
Right Cover