Start the Peck on PC.
12
[Peck] screen is displayed, and click [Put Parameters] button.
[OPEN] screen is displayed.
13
Select the System Parameter le that is saved before the
Main Board replacement.
Click [Open]. Peck starts to send the System Parameter to
the printer.
Click [Get Report] button to import the System Report fi le.
14
Confi rm that the System Parameter is reloaded properly.
The network settings set at the step 11 are replaced
with the ones saved in the System Parameter as [Put
Parameters] is executed.
Please do the network settings again if necessary.
4-22