Roland VersaCamm VS-640 Service Notes page 105

Fix the Tool Carriage Assy to the Tool Carriage Board Stay
12
with the two screws as shown in the fi gure.
Fix the Tool Carriage Board with the two screws as shown in
13
the fi gure.
Connect the Crop Mark Sensor, Pinch Roller Sensor and
14
Solenoid wirings.
Fix the Tool Carriage Board Cover with the four rivets shown
15
in the fi gure.
Tool Carriage Board
Crop Mark Sensor Cable
Pinch Roller Sensor Cable
Tool Carriage Board Cover
3-32
Tool Carriage Board Stay
Solenoid