Roland VersaCamm VS-640 Service Notes page 259

Confi rm that [START] is selected, and press [ENTER] key to
4
turn on the Take-up Unit.
[START] or [STOP] can be selected with [
[ ] keys.
The current setting is displayed on the left and the
new setting is displayed on the right.
Set [AUTO] switch of the Take-up Unit to either [FORWARD]
5
or [BACKWARD].
Move the Dancer Roller up and down by hand, and confi rm
6
that the drive part rotates.
The operation status of Take-up Unit can be con-
fi rmed also on the LCD. [ * ] is displayed on the right
side of upper LCD while driving, and not displayed
while not driving.
TU
START
Select [STOP] with [
7
key.
*
START
] and [ ] keys, and press [ENTER]
TU
START
] and
Drive Part
TU
START
4-61
START
[ ]
Dancer Roller
STOP
[ ]