Carriage Belt Replacement - Roland VersaCamm VS-640 Service Notes

3-12 CARRIAGE BELT REPLACEMENT

!! IMPORTANT !!
When replacing the Carriage Belt, make sure to connect the new belt to the current belt, and pass the new belt
at the same time as removing the current belt.
There is a possibility that the new belt cannot be fi xed without connecting the new belt to the current belt.
Turn off the Sub Power SW, and then turn off the Main Power
1
SW.
Remove the Covers in order.
2
1. Front Cover
2. Right Cover
3. Right Top Cover
4. Left Cover
5. Front Rail Cover
6. Top Cover
7. Ink Cartridge Cover
Separate the Tool Carriage from the Head Carriage.
3
OFF
Left Cover
Front Rail Cover
Front Cover
3-69
Ink Cartridge Cover
Top Cover
Right Top Cover
Right Cover