Roland VersaCamm VS-640 Service Notes page 291

!! IMPORTANT !!
The accuracy of Dual-pass Printing (Printing after pull-back the printing) is not specified.
The default media profiles in VersaWorks do not provide any Dual-pass print mode such as [-onWhite] or
[-underWhite].
Message for Ink Circulation
White ink and metallic silver ink are circulated periodically to prevent the ink precipitation automatically.
Adding Media Profiles
Explain the procedure of adding Media Profiles of third-party media.
Downloading Media Profiles from the web site.
Adding Media Profiles to VersaWorks.
!! IMPORTANT !!
In the print mode for Mt ink, the ink may not dry fully depending on the type of the media. Confirm the proper
printing result in a trial printing beforehand.
Job outputting from
Roland VersaWorks
Explain each procedure as follows on a job outputting from Roland VersaWorks.
Printing
Cutting
!! IMPORTANT !!
Never use the Media clamps during cutting.
Printing and cutting
Print then Cutting with Crop Marks (Refer to User's Manual [Printing with Crop Marks])
- Aligning Automatically and Cutting
- Aligning Manually and Cutting
When printing and cutting are performed using Crop Marks, misalignment of cutting caused by media stretch/
shrinkage can be avoided.
7-14