Problem In Network (Rip Does Not Recognize The Printer); Error Message - Roland VersaCamm VS-640 Service Notes

6-16 PROBLEM IN NETWORK (RIP DOES NOT RECOGNIZE THE PRINTER)

NO CHECK
Turn off the main power
1
and restart the printer
2
Refix the cable
3 Network problem
4 Main board is damaged

6-17 ERROR MESSAGE

NO CHECK
1 service call
2
Internal Error
ACTION
Connect them directly
with a crossover cable
Replace the Main board
ACTION
Restart the machine
Refer to SERVICE CALL
[6-18 SERVICE CALL]
as follows
Restart the machine
Upgrade the firmware to
the latest version
REFERENCE
It can be solved by restarting the printer with the main power.
Try it several times.
It can be solved by refixing the network cable. Try it several
times.
The problem may be in the network when they are connected
through LAN. It can be identified whether the problem is on the
printer or the network, by connecting the PC and the printer
directly with a crossover cable.
Main board may be damaged if the problem is not solved by the
measures above.
REFERENCE
Restart the machine and see if the same error occurs again.
Restart the machine and see if the same error occurs again.
Check the revision record of the firmware version and upgrade it
if the error has been solved in the firmware.
6-11
OUTLINE
OUTLINE